Introduction to riveting technology of industrial castors
Riveting steps will be involved in the actual installation and application of industrial casters. The

quality of riveting technology is related to the safe use of subsequent casters. Therefore, Hanke

casters will introduce what is the riveting technology of industrial casters in detail below.

1. The industrial caster riveting method makes the deformation of the rivet follow the natural flow

direction of the metal, does not reduce the notch impact toughness and ductility of the material,

reduces the risk of excessive tangential tensile stress around the rivet pier head, and the material

has no broken fiber flow after riveting, which can improve the bearing capacity of the rivet. After the

destructive test of swinging cold rolling caster riveting and traditional hammering and stamping caster

riveting specimens, it is known that the connection strength produced by cold rolling caster riveting

method is about 80% higher than that of traditional caster riveting. After cold rolling caster riveting,

the rivet has almost no deformation such as bending, bulging and pier thickness. At the same time,

the parts connected with the rivets have no deformation. The above defects are more obvious due

to the pressure of strength and the impact in full bloom.

2. The rivet head of industrial caster riveting method rolls on the rivet without sliding. The surface

roughness of the formed rivet only depends on the rivet head, and the surface roughness of the

rivet head is easy to ensure. Therefore, the cold rolled caster riveting rivet has a smooth and

beautiful surface, which can not be compared with other caster riveting methods.

3. When cold rolling caster riveting method is adopted, there is almost no noise (less than 70 dB)

and no vibration during caster riveting. The noise of traditional hammering, stamping and caster

riveting is more than 90 dB.

4. Industrial caster riveting machine is easy and safe to operate. In punching and riveting of punch

press, malignant accidents such as punching off fingers often occur, and accidental injury of manual

hammer riveting also occurs from time to time, while grinding and riveting is relatively safe. Although

the spindle rotates, it has a feasible safety cover, and the contact surface between the rivet head

and the workpiece is small.

5. When using the cold rolling caster riveting machine, because the rivet material has particularly

good deformation performance, the rivet rod will not have quality problems and has high service life.

At the same time, as long as the shape of the rivet head is changed, casters can be riveted in a

variety of shapes. The above is an overview of industrial caster riveting technology.

Industrial Swivel Casters Parameter

Industrial Swivel Casters Describe

Industrial Swivel Casters Size

Industrial Swivel Casters Material

Industrial Swivel Casters Scope of application

Application.

About us.

KTC.