Sysolution Receiving card D60-16
Product Introduction
The D60-16 is a standard receiver card launched by Shenzhen Sysolution Company. Featuring 16 standard HUB75E interfaces, supporting up to 32 groups of RGB parallel data and carrying up to 768X256 pixels, it has powerful processing capability, ultra-stable performance and super high cost performance.
Product Image

Loading Capacity
Three lines parallelism (RGB) | Data interface/number | Drive | Maximum loading (Pixels) | Brightness correction loading (pixels) | Chromaticity correction loading (pixels) |
32 groups | HUB75E/16 | Normal | 768*256 | 512*256 | 256*320 |
PWM | 768*256 | 768*256 | 256*320 |
Number of cascade cards | Support scan line | | |
≤1000PCS | 1-64 scan | | |
Function Definition
Function | Description |
Improved display effect | - Support point-by-point brightness and chroma correction: with the correction software, the brightness and chroma of each lamp point of the large screen can be corrected to effectively eliminate color difference so that the brightness and chroma of the display can reach a high degree of consistency and improve the picture quality of the display.
- Support a variety of display effect solutions: with LedSet4.0 software to achieve refresh priority and grayscale priority effect.
- Support 90° multiples of screen rotation: with LedSet4.0 software, it can rotate 90° multiples of the receiving card screen.
- Support screen scaling function: with LedSet4.0 software, the pixels carried on the receiver card can be scaled in multiples to achieve the enlargement and reduction of the display screen.
|
Upgraded operability | - Support receiving card serial number detection: with the network port debugging function in LedSet4.0 software, the receiving card number and network port information will be displayed on the target box, and users can be informed of the receiving card location serial number and connection line.
- Support data interface customization: with LedSet4.0 software, the output data of the receiver card can be detected and editable.
- Support the construction of complex boxes: In the advanced layout of LedSet4.0 software, you can quickly make any arrangement and construction of box modules.
- Support the construction of complex large screen: In the complex display connection of LedSet4.0 software, the box can be quickly arranged and constructed arbitrarily.
|
Hardware Stability | - Network Circuit backup: The network port is connected by the main and backup network circuit to increase the reliability of the receiving card serial connection. When one of the main and backup serial lines fails, the other one can ensure the normal display of the screen.
|
Software Intelligence | - Support reading back the configuration parameters of the receiving card: you can read back the current receiving card configuration parameters on LedSet4.0.
- Support network cable BER(Bit Error Rate) detection: on LedSet4.0, the communication signal quality of the network cable connected to the system hardware can be monitored in real time, so as to quickly determine the network cable and troubleshoot.
- Communication monitoring function: real-time monitoring of receiving card working status on LedSet4.0.
|
Output Port Definition
32 groups of parallel data interface definitions




JP1-JP16 data interface definitions
Pin | 1 | 3 | 5 | 7 | 9 | 11 | 13 | 15 |
Definition | R0 | B0 | R1 | B1 | A | C | CLK | OE |
Pin | 2 | 4 | 6 | 8 | 10 | 12 | 14 | 16 |
Definition | G0 | GND | G1 | E | B | D | LAT | GND |
J12 definitions
Pin | 1 | 2 | 3 | 4 | 5 |
Definition | GNDKEY- | KEY+ | LEDR- | 3V3LED+ | LEDG- |
Indicator Description
Indicator | Position | Status | Description |
Status Indicator (Green) | U1 | Uniform slow flash | . The receiver card works normally, the network cable is connected normally, and there is no DVI signal input. |
Uniform fast flash | The receiver card works normally, the network cable is connected normally, and there is DVI signal input. |
Black Screen | No gigabit network signal |
Intermittent flash 3 times | The receiver card is working normally, the network cable circuit is connected, and there is DVI signal input. |
Status Indicator (Red) | U3 | Ever Bright | Power supply is normal |
Dimension
Working Parameters
Electric parameter | Input Voltage | DC3.5-5.5V |
Rated current | 0.6A |
Rated power | 3W |
Working Environment | Working temperature | -20℃ - 70℃ |
Working humidity | 10%RH-90%RH |
Storage Environment | Temperature | -25℃~125℃ |
Board Card Size | 144.02mmX91.19mm |
Net Weight | 100.8g |
Certification Information | RoHS compliant, CE-EMC compliant |