100W LED High Bay Light

【1】specialty:

【A】Adopting Epistar / Bridgelux integrated Chip as light source with high lighting efficiency, high CRI, low light degradation.

【B】There is build-in dedicated power supply, input voltage: AC100~277V,Power Efficiency:>87%,Power Factor:>0.97,constant voltage, constant current. Over voltage over power over current protection, lighting protection.

【C】Good aluminum alloy heat sink with good quality heat dissipation, aluminum alloy equipment box, high strength, IP 62,small reflector cap for focusing the light, big one for gathering the light, it achieves an ideal lighting effect.
【D】Can start up within 1`3 seconds, no flicker, anti-jamming, no mercury, energy saving, environment friendly.

【2】 Shape Structure

Shell Material: Aluminum Alloy

Shell Color: Black

Weight: 7.0Kg

【3】Parameter

【4】Diagram of degradation for Luminous

1,The data above has been got at a temperature of 25 Celsius degree and taking 1000 hours running by a non stop way.
2,Degradation of luminous flux of LED lamps depends on environmental conditions. The higher the temperature,
the longer the using time, the faster luminous flux drops.

【5】Photomatric Data

【6】Illumination Distance/illuminance/Irradiated Area

【7】Packing specification

Lamp Packing:(L)284×(W) 222×(H) 449mm 1PC/CTN 9.5Kg

Reflector Packing:(L)572×(W) 572×(H) 314mm 10PCS/CTN 7.5Kg

【8】Using and installing instructions

A.Installation Procedure

As Picture No.1 Showed, Install reflector on the heat sink, wrest fixed screws very tightly

As Picture No.2 Showed, Wrest hanger into top cap, wrest lock screw very tightly

As Picture No.3 Showed, Hang the lamp on the installation site,and screw down the non skid lock.

As Picture No.4 Showed, Hang chaining of steel wire on another installation device.

As Picture No.5 Showed, Connect Live Wire/Null Wire/Ground Wire to electric cable properly and switch on.

Attentions:

Only professional electrician can install the lamp, please check the lamp very carefully before installation

Please install the lamp follow up the installation procedure, make sure the screw has been wrested very tightly, the wires have been connected properly, .Please operate according to Product Instructions enclosed.

If you are interested in LED high bay light,please click LED high bay lights for more information.