Multi-functional Night Light,rechargeable motion sensor Led Light,cabinet night light

Specification OF PIR Motion sensor led lights:

Please allow about 1cm error due to manual measurement, and slight color difference caused by light and screen.)

12LED USB Rechargeable PIR Motion Induction Sensor Closet Nightlight LampPRODUCT PICTURE

PRODUCT DESCRIPTION

Mini Ultra-thin closet light

PIR Motion & light sensor: At dark place, it will light up automatically when you get into 10ft detection range, and auto go out 15 seconds after you get out of the range;

Suitable for stairway, drawer, under-cabinet, pantry, bedroom, wardrobe, workshop, bookshelf, attic, closet, basement, hallway, corridor, headboard, trunk lighting, etc.

Three modes

ON: constant lighting

OFF: turn light off

AUTO: auto-sensing state, light up automatically in the dark when motion is

Rechargeable: Built-in 600mah lithium battery,It can last for 4 hours when fully charged at ON mode and Last 2 months at AUTO mode. Compatible with wall charger, PC USB port;

High brightness: pure white 180lm, 12pcs high bright Epistar SMD LED chips, environment friendly and low power consumption;

Compact motion sensor LED under cabinet light adopt with high bright Epistar 2835 LED light source, combining passive infrared (PIR) technology to detect motions.

Under AUTO mode, it will light up automatically in the dark when a motion is detected and auto turn off for hands-free convenience.

Easy installation: magnet and 3M adhesive tape, could be hung and stick-on No tools, screws or nuts are required when installation.

Detection range: 10ft

LED life: Above 80000h

Current: 600mA

Delay time: 15 seconds

Input voltage: 5V DC

Output voltage: 3.7V

Brightness: 180lm

Working temperature: -10 ~ 50℃

Motion angle: 120°

Product Size(L x W x H): 120X38X17mm

Notices

-As built-in photo sensor, it may not work in AUTO mode in daylight or bright surroundings.

-Non-waterproof, do not use it in any heavy humidity or low temp location.

-Try not to mount 2 lights so near. They may interact each other in AUTO mode.

PRODUCT DESCRIPTION

Installations

Human body induction lamp motion sensor led night light

Feature:

100% brand new and high quality.

3 sensor modes: PIR motion sensor / Light sensor / Manual control.

Compatible with wall charger, PC USB port, more convenient to charge.

High brightness with 12LEDs, environment friendly and low power consumption.

Push the button to the ON, it is in steady on state;push it to the Off, it is in off state; and push it to the Auto, it is in

both light sensor and light control state, and please allow 15-20s' time delay.

Built-in 600mah lithium battery, which can last for 4 hours when fully charged at ON mode and last 2 months at auto mode.

Motion and light sensor. At dark place, it will light up automatically when you get into 10ft detection range and automatically

light off 20 seconds later if you get out of the range.

Simple installation: an adhesive strip with magnetic fields is easily attached to and detachable from the lamp body.

No screws or nuts are required.

Practical and durable, suitable for wardrobe, cabinet, bathroom, etc.At the same time also can be hang on the wall

and used as door lamp at night.

PRODUCT APPLICATION:

PRODUCT APPLICATION

Package Included:
1 x LED Sensor Light
1 x USB Charging Cable
2 x Adhesive Tapes
1 x Manual

Product Size: Approx. 12 * 3.8 * 1.7cm / 4.7 * 1.5 * 0.7inch
Product Weight: Approx. 95g

Note:
1. As built-in photo sensor, it may not work in AUTO mode in daylight or bright surroundings.
2. Non-waterproof, do not use it in any heavy humidity or low temp location.
3. Try not to mount 2 lights so near. They may interact each other in AUTO mode.