S5650-28TM
o Backplane capacity 128Gbps
o Throughput 95.2Mpps
o 12*10/100/1000Base-T
o 12*GE Combo
o 2*10GE slot
o 1+1 redundant power
o Support stack
o Full-loaded power ≤40W
o 440mm*380mm*44mm
S5650-28SM
o Backplane capacity 128Gbps
o Throughput 95.2Mpps
o 12*10/100/1000Base-X
o 12*GE Combo
o 2*10GE slot
o 1+1 redundant power
o Support stack
o Full-loaded power ≤50W
o 440mm*380mm*44mm
S5650-28PM
o Backplane capacity 128Gbps
o Throughput 95.2Mpps
o 24*10/100/1000Base-T
o 4*GE Combo
o 2*10GE slot
o 1+1 redundant power
o Support stack
o Full-loaded power ≤40W
o 802.3af and 802.3at
o Max power supply for single port is 30W
o 440mm*380mm*44mm
S5650-52TM
o Backplane capacity 256Gbps
o Throughput 130.9Mpps
o 44*10/100/1000Base-T
o 4*GE Combo
o 2*10GE slot
o 1+1 redundant power
o Support stack
o Full-loaded power ≤60W
o 440mm*380mm*44mm
S5650-52SM
o Backplane capacity 256Gbps
o Throughput 130.9Mpps
o 44*10/100/1000Base-X
o 4*GE Combo
o 2*10GE XFP slot
o Support stack
o Full-loaded power ≤70W
o 440mm*380mm*44mm
Product Specification:
Attributes |
S5650-28TM-AC/DC |
S5650-52TM-AC/DC |
S5650-28SM-AC/DC |
S5650-52SM-AC/DC |
S5650-28PM |
|||
Backplane capacity |
128Gbps |
128Gbps |
256Gbps |
256Gbps |
128Gbps |
|||
Switching capacity |
128Gbps |
128Gbps |
256Gbps |
256Gbps |
128Gbps |
|||
Throughput (IPv4/IPv6) |
95.2Mpps |
95.2Mpps |
130.9Mpps |
130.9Mpps |
95.2Mpps |
|||
Memory and storage |
256MB DDR2 SDRAM Memory and 8MB Flash Memory |
|||||||
Redundancy design |
1+1 hot-swap redundant power |
|||||||
Power supply |
AC:Input 90~260V,50~60Hz; DC:Input -36V~-72V; |
|||||||
Power consumption |
Full-load ≤40W Idle ≤15W |
Full-load ≤50W Idle ≤15W |
Full-load ≤60W Idle ≤30W |
Full-load ≤70W Idle ≤30W |
Full-load ≤40W Idle ≤15W |
|||
POE power supply |
- |
- |
- |
- |
Single power can supply 360W |
|||
Outline dimensions (mm) (W*D*H) |
440mm×380mm×44mm |
|||||||
Weight (in maximum configuration) |
≤6kg |
≤6.5kg |
≤6kg |
≤6.5kg |
≤6kg |
|||
Environmental requirements |
Working temperature:-15°C~55°C Storage temperature:-40°C~70°C Relative humidity:10%~90%,no condensing |
|||||||
Business Features:
Attributes |
TiNet S5650 Series |
|
L2 features |
MAC |
16K MAC address MAC Black Hole Port MAC Limit |
VLAN |
4K VLAN entries Port-based/MAC-based/IP subnet-based VLAN Port-based QinQ and Selective QinQ (StackVLAN) VLAN Swap and VLAN Remark PVLAN to realize port isolation and saving public-vlan resources GVRP |
|
Spanning tree protocol |
IEEE 802.1D Spanning Tree Protocol (STP) IEEE 802.1w Rapid Spanning Tree Protocol (RSTP) IEEE 802.1s Multiple Spanning Tree Protocol instances (MSTP) Remote loop detecting |
|
Port |
Bi-directional bandwidth control Static link aggregation and LACP(Link Aggregation Control Protocol) Port mirroring and traffic mirroring |
|
Security features |
User’s security |
Anti-ARP-spoofing Anti-ARP-flooding IP Source Guard create IP+VLAN+MAC+Port binding Port Isolation MAC address binds to port and port MAC address filtration IEEE 802.1x and AAA/Radius authentication |
Device security |
Anti-DOS attack(such as ARP,Synflood, Smurf, ICMP attack), ARP detection, worm and Msblaster worm attack SSHv2 Secure Shell SNMP v3 encrypted management Security IP login through Telnet Hierarchical management and password protection of users |
|
Network security |
User-based MAC and ARP traffic examination Restrict ARP traffic of each user and force-out user with abnormal ARP traffic Dynamic ARP table-based binding IP+VLAN+MAC+Port binding L2 to L7 ACL flow filtration mechanism on the 80 bytes of the head of user-defined packet Port-based broadcast/multicast suppression and auto-shutdown risk port URPF to prevent IP address counterfeit and attack DHCP Option82 and PPPoE+ upload user’s physical location Plaintext authentication of OSPF,RIPv2 and BGPv4 packets and MD5 cryptograph authentication |
|
IP routing |
IPv4 |
ARP Proxy DHCP Relay DHCP Server Static route RIPv1/v2 OSPFv2 BGPv4 ECMP Strategy route Route policy |
IPv6 |
ICMPv6 ICMPv6 redirection DHCPv6 ACLv6 OSPFv3 RIPng BGP4+ Configured Tunnel ISATAP 6to4 tunnel IPv6 and IPv4 Tunnels |
|
Service features |
ACL |
Standard and extended ACL Time Range ACL Packet filter providing filtering based on source/destination MAC address, source/destination IP address, port, protocol, VLAN, VLAN range, MAC address range, or invalid frame. System supports concurrent identification at most 50 service traffic Packet filtration of L2~L7 even deep to 80 bytes of IP packet head |
QoS |
Rate-limit to packet sending/receiving speed of port or self-defined flow and provide general flow monitor and two-speed tri-color monitor of self-defined flow Priority remark to port or self-defined flow and provide 802.1P, DSCP priority and Remark CAR(Committed Access Rate),Traffic Shaping and flow statistics Packet mirror and redirection of interface and self-defined flow Super queue scheduler based on port and self-defined flow. Each port/ flow supports 8 priority queues and scheduler of SP, WRR and SP+WRR. Congestion avoid mechanism,including Tail-Drop and WRED |
|
Multicast |
IGMPv1/v2/v3 IGMPv1/v2/v3 Snooping IGMP Filter MVR and cross VLAN multicast copy IGMP Fast leave IGMP Proxy PIM-SM/PIM-DM/PIM-SSM PIM-SMv6,PIM-DMv6,PIM-SSMv6 MLDv2/MLDv2 Snooping |
|
Reliability |
Loop protection |
EAPS and GERP (recover-time <50ms) Loopback-detection |
Link protection |
FlexLink (recover-time <50ms) RSTP/MSTP (recover-time <1s) LACP (recover-time <10ms) BFD |
|
Device protection |
VRRP host backup Double fault-tolerant backup of host program and configuration files Board card hot swap S5650-24S/48S support 1+1 power hot backup |
|
Maintenance |
Network maintenance |
Telnet-based statistics RFC3176 sFlow LLDP 802.3ah Ethernet OAM RFC 3164 BSD syslog Protocol Ping and Traceroute |
Device management |
Command-line interface(CLI), Console, Telnet and WEB configuration System configuration with SNMPv1/v2/v3 RMON (Remote Monitoring)1/2/3/9 groups of MIB NTP(Network Time Protocol) GN.LinkⅡ Server NGBNView network management WEB-based network management Ping and Traceroute |