Parameters:
Model |
MS-PL20011 |
||
Input Voltage |
AC90-264V 50/60Hz |
||
Dimension |
L597*W597*H30mm |
||
Lighting Source |
64PCS 5630 |
||
Power Consumption |
33W |
||
Color Temperature |
WW(2800~3300K) |
NW(4000~4500K) |
CW(6000~6500K) |
Luminosity |
≥2410lm |
≥2580lm |
≥2720lm |
CRI(Ra) |
>75 |
||
Beam Angle |
180° |
||
Work Temperature |
-25℃~+45℃ |
||
Material |
Iron+PMMA |
||
G.W |
2.15kg |
||
N.W |
2.07kg |
||
Cap ends |
/ |
||
Lifespan (LED) |
≥50,000hrs (70% Lumen Maintenance) |
||
IP Rating |
IP50 |
||
Lumen Attenuation |
<5% @ 5,000hrs |
||
Packing Dimension |
L640*W640*H55mm |
Applications:
LED panel light can be extensively applied to general lighting, such as mall, store, hotel, office, supermarket, commercial building, station, warehouse,
residential, parking lot, home, restaurant, railway, subway station, bank, exhibition gallery, library, closet, factory, etc. Replace conventional fluorescent
lamp or sodium lamp.Energy efficient and environmentally friendly.
Easy to install: LED light fixture and LED driver (included) are all detachable.
• Low profile design; its height is less than 3/4 inch
• Sturdy aluminum housing, it does not sag
• Mounting hardware & a remote LED driver included
• Can be mounted on a wall & ceiling
• High quality diffuser achieves even and soft light output
• Perfect way to modernize your home or business by saving money on your energy and maintenance costs
Installation:
1. Unpack the SIMAO LED panel light from the packaging box.
2. Take out the LED driver and the LED panel light with caution.
3. Connect the LED driver and the LED panel light into the DC power cord connector (red to red, black to black). Do not connect the LED panel light into any other noncompatible
LED driver which may cause product damage.
4. The DC power cord connector should be properly connected, not loose.
5. Turn off the main power source before installation to avoid electric shock. Then properly insert Line (L) and Neutral (N) into the AC power connector.
6. The AC power connector should be properly connected, not loose.
7. Remove the ceiling where the LED driver and the LED panel light will be installed.
8. Carefully insert the LED driver and the LED panel light into the removed ceiling.
9. Turn on the AC power to light up the LED panel light.