Product Specification:

1) LED Power:10.0W

2)Total Power:11.0W

3) Luminous Flux: 770lm

4) Input VoltageAC 100-240V, 50/60Hz

5) LED working currentCC 290mA

6) LEDLumenmax

7 Viewing angle: 180°

8)CRI: ≥72 Ra

9) Luminous flux:WW (2700-3300K), NW (4000-4500K), CW (5500-6500K)

10) Extreme temperature: -10℃～45℃

11) Surface temperature≤50℃

12) Lifespan: 30000 H

Product Dimension (mm):

Features:

a. Unique and super-slim designation. The thickest part of the product is only 8.5 mm

b. Wide range of voltage which can be used all over the world. Constant current all through 85 V-264 VAC voltage range ensures protect the lifespan and brightness from voltage fluctuations.

c. Environmental-friendly: no mercury, no pollution. Assembly components can be very easily dismantled and outfit. Other people can recycle them without the help of manufacturers.

d. Safe and reliable. The driver isolates the high voltage and low voltage which ensure safety

e. More than 30000 hour's lifespan can save a lot of maintenance expense

f. No ultraviolet (UV) and infrared (IR) radiation. Human won't grow flecks even under the light long time.

g. High range of color temperature, almost all the color temperatures are available.

h. The light is very soft.

Applications:

LED panel light can be extensively applied to general lighting, such as mall, store, hotel, office, supermarket, commercial building, station, warehouse,
residential, parking lot, home, restaurant, railway, subway station, bank, exhibition gallery, library, closet, factory, etc. Replace conventional fluorescent
lamp or sodium lamp.Energy efficient and environmentally friendly.


Easy to install: LED light fixture and LED driver (included) are all detachable.
• Low profile design; its height is less than 3/4 inch
• Sturdy aluminum housing, it does not sag
• Mounting hardware & a remote LED driver included
• Can be mounted on a wall & ceiling
• High quality diffuser achieves even and soft light output
• Perfect way to modernize your home or business by saving money on your energy and maintenance costs


Installation:


1. Unpack the NC LED panel light from the packaging box.
2. Take out the LED driver and the LED panel light with caution.
3. Connect the LED driver and the LED panel light into the DC power cord connector (red to red, black to black). Do not connect the LED panel light into any other noncompatible
LED driver which may cause product damage.
4. The DC power cord connector should be properly connected, not loose.
5. Turn off the main power source before installation to avoid electric shock. Then properly insert Line (L) and Neutral (N) into the AC power connector.
6. The AC power connector should be properly connected, not loose.
7. Remove the ceiling where the LED driver and the LED panel light will be installed.
8. Carefully insert the LED driver and the LED panel light into the removed ceiling.
9. Turn on the AC power to light up the LED panel light.