XYZ Module Screwing Machine With 4 Screw Driver CWS2YZ

Technical Parameters

Efficiency: 1piece/ second

Power supply: 110V AC/220V AC (50Hz/60Hz)
Air supply:0.4-0 .8 Mp
Screw: M2-M5 (maximum length of 50mm)
Screw driver: 4
screwdriver torque: optional according to customer requirements (the machine is 0.3-1.9 Nm)
Module number: X-axis (1) Y-axis (2) Z-axis (a) may also be optional according to customer demand
Module running speed: Max 1000mm / s
Product fixture: two sets
Electric screwdriver Brand: Taiwan Kilews (torque automatic clutch)
Servo motor: Panasonic
PLC: Mitsubishi
Touch screen: Panasonic
Pneumatic components: SMC or AirTAC
XYZ axis travel: 100mm-1500mm
Module Repeatability: ± 0.02mm
Dimensions: according to product design
Quantity can be set to lock screw: Max: 1000 pcs
Detection: slide lock ,floating teeth
Allowable failure rate: 0.1%

.Advantages

1 Using the machine can reduce manpower to 1/5, can reduce four locking screws workers.
2 double Y-axis work alternately, save lots of times

3 can be set by the touch screen coordinate value and the product of the screw, can be applied to a variety of common products. If the screw on the product specification is basically the same, you only need to replace the fixtures they can use the product, the entire process is completed in less than 10 minutes.
4 locking screws monitor the whole quality of the equipment in the event of a bad touch screen will display the type of alarm and defective products.
5 can be installed according to the requirements of customers in a position to put the product safety light curtain, when the operator's hand into his lock screw area, the machine immediately stop the action before you can continue to be run by an operator to manually reset the device.
6 can be equipped with multi-position cam splitter plate or intermittent lock screw gantry approach to online equipment design and production.
7 arrives after the award of automatic electric clutch torque will automatically ensure that each lock screws Vice torque control ± 10%.
8 main parts are die steel production, abrasion resistant plastic deformation, equipment, body spray paint, oil and scratch resistant.
9 more humane touch-screen operation and ease of operation, external technical parameters and manual test function can be directly adjusted by technicians.

Brief introduction

Dongguan ChuangWei Electronic Equipment Manufactory was founded in 2004,is located in the world manufacturing city Dongguan,Guangdong,China. The company is committed to development,manufacture,sales and service for professional pcb separator/pcb depanelizer electronic equipment machinery. The company has advanced production and processing equipment and an experienced development and manufacture team, half of them have over 10 years experience in electronic equipment industry.

Begin with 2004 the company leader invested to develop and manufacture the PCB separator and PCB depaneling machine. From then on we pay more attention to product quality, safe to use and product innovation, so far we have produced many high quality, stable performance, high cost-effective products. Improve production yields, increase productivity, and thus enhance the market competitiveness of our customers.

Until now we have design different separating PCB types of PCB separator and PCB depaneling machine with manual, motor-driven, pneumatic-driven, mold punching, milling cutter router. Due to the good quality and reasonable price our customers are all over the world. Up to now ChuangWei have became one of the biggest PCB separator production base in China

Company always insists to the "customer needs is our goal, creating most value for customers", strives to provide customers with first-class products, first-class service. So since date established we very attached importance to product quality,continuous improvement for manufacturing process,try hard to save money for customers.

Why choose us

1. Engineers available to service machinery oversea.

Engineers are available to be sent to freign countries to do machinery training and offer technical support.

2. One year warranty for the machines except accessories.

Robust frame construction and Japanese steel blades obtained good appraise and recognized by and oversea clients. We offer parts for replacement under warranty free of charge, clients only need to bear freight charge.

3..Effective customer service.

All of us together are stronger and wiser than any one of us individually. To succeed, we must assume responsibility, cooperate with fellow associates and withdepartments, effectively comminicate with one another, foster enthusiam and participate in decision-making. To be seay reachable by customers and provide prompt replies to solve their problems and create value for customers

4. Mature technique & forerunner to process makes high quality machinery.

As largest manufactory in South China, we have 12 years experience on PCB separator machines and soldering machines. pcb router machine

Our R&D team continuously upgrade the existing machines to meet the market development trend

Packaging and delivery

Cooperative partners