Overtime Protection Touchless IP65 Automatic Water Saver Tap

Product Feature

1) Automatic on/off: Infrared sensor faucet automatically turns on and off (Convenience & Hygiene).

2) Adjustable sensor range by a remote controller (optional).

3) Time Limit: Washing time is set for 60 seconds.

4) Low power indication: This may indicate it is time to replace existing batteries with new ones or there is not enough power going to unit.

5) Water saving: Water efficient faucet reduces overall water usage without sacrificing water pressure.

Introduction

1. Two power supply modes: DC (4 x AA alkaline batteries) or/and AC (100V~240V 2-phase) with power back protection.
2. Stand-by current: <20uA.
3. Working current: < 500mA.
4. Control mode: infrared reflectance mode.
5. Water temperature: ≤75°C.
6. Working water pressure: 0.05MPa~0.8Mpa.
7. Maximum torque: 10 N·M (The control valve’s thread to connect flexible hose can withstand 10 N·M torque within 60s, no cracks and no damage to the valve).
8. Sensor range: 1cm~ 13cm ±10%. The change of sensor range doesn’t exceed ±10% when the voltage changes between 4.5V and 6.0V.
9. Opening response time≤0.2s, closing response time: 0.5s ~1.0s.
10. Consumed power in stand-by: < 0.12mW; consumed power in working < 3W.
11. Power-off protection: the solenoid valve will shut-off automatically in case the power fails & the faucet is on working state.
12. Low-voltage protection: the red indicator keeps flashing once per second to remind the user to change the batteries when the voltage drops to 4.5V. The solenoid valve will shut-off when the voltage drops to 4V.
13. Moisture resistance: the metal parts in the battery box can pass the moisture resistance test according to CJ/T 194-2014
14. Corrosion resistance: the coating can pass NSS 200 hs corrosion test according to ISO 3768.
15. Quality guarantee: 5 years.

Details