Features
1. It is applicable to the occasion of uninterrupted gas supply. When one end is exhausted, it will automatically switch to the other end
2. With the air supply priority selection handle, you can set the priority air supply source
3. WR11 pressure reducer is used as the prototype valve, which can be used for corrosive and toxic gases
4. Wv4c diaphragm valve two-way three-way valve is adopted, with fewer links
5. Install a 20 micron filter element at the inlet
6. Oxygen environment application options are available
7. The output pressure is within a certain range and has been set at the factory
Working Principle
1. Wcosr11 series switching device includes two independent pressure reducing valves. Adjust the outlet pressure on the left and right sides by operating the linkage lever, that is, when the left increases, the right decreases and the left supplies air; When the right increases, the left decreases, and the right supplies air
2. When one side of the air supply is exhausted, it will automatically switch to the other side of the air supply
3. Close the inlet diaphragm valve, open the pressure relief diaphragm valve, empty the air source on the exhausted side, and then replace with a new air source
4. The priority air supply source can be selected by turning the switch handle
Model selection table
6L | 35 | 100 | 00 10 | RC | O2 |
body material | Inlet pressure P1 | Outlet pressure range P2 | Inlet / outlet specifications | Accessory options | Cleaning process |
6L SS316L | 35:3500PSI | 100:85-115PSIG | 00:1/4"NPT F | No requirement | Standard (grade BA) |
150:135-165PSIG | 01:1/4"NPT M | P:Inlet equipped with pressure sensor | C2:Oxygen cleaning | ||
200:185-215PSIG | 10:1/4" OD | R:Outlet equipped with unloading valve | |||
250:235-265PSIG | 11:3/8" OD | C:Inlet equipped with one-way valve | |||
HC:CGANo. with high pressure hose (USA) | |||||
HDIN:DIN No. with high pressure hose (Germany) |
FAQ
Q. Are you manufacturer?
A. Yes, we are manufacturer.
Q.What is lead time?
A.3-5days. 7-10 days for 100pcs
Q. How do I order?
A.You can order it from Alibaba directly or send us a inquiry. We will reply you within 24 hours
Q. Do you have any certificates?
A. We have CE certificate.
Q. What materials do you have?
A. aluminium alloy and chrome plated brass are available. The picture shown is chrome plated brass. If you need other material, pls contact us.
Q. What is maximum inlet pressure?
A.3000psi (about 206bar)
Q. How do I confirm inlet connnection for cylidner?
A. Pls check cylinder type and confirm it. Normally, it is CGA5/8 male for Chinese cylinder. Other cylidner adapter are also
available e.g CGA540, CGA870 etc.
Q. How many types for connecting cylinder?
A. Down way and side way. (you can choose it)
Q. What is product warranty?
A: The free warranty is one year from the day of Commissioning qualified.If there is any fault for our products within the free warranty period, we will repair it and change the fault assembly for free.