LiFePO4 Battery Prismatic Type 3.2V 20AH 92108250 For Energy Storage System
Quick Detail:
Place of Origin: | Guangdong China (Mainland) |
Brand Name: | TAC |
Model Name: | 3.2V 192108250Fe 20Ah |
Other Name: | LiFePO4 20Ah Battery |
Nominal Voltage | 3.2V |
Nominal Capacity: | 20Ah |
Size: | : Max 9.2(T)*108(W)*250(H) mm |
Weight: |
|
No.
| Item
| General Parameter
| Remark
| |
1 | Rated Capacity
| Typical
| 20Ah | Standard discharge(0.2 C5A) after Standard charge
|
Minimum
| 19.5Ah | |||
2 | Nominal Voltage
| 3.2V | Mean Operation Voltage
| |
3 | Voltage at end of Discharge
| 2.0V | Discharge Cut-off Voltage
| |
4 | Charging Voltage
| 3.65V | ||
5 | Internal Impedance
| ≤40mΩ | Internal resistance measured at AC 1KHZ after 50% charge
The measure must uses the new batteries that within one week after shipment and cycles less than 5 times
| |
6 | Standard charge
| Constant Current 0.2C5A Constant Voltage 3.65V 0.01 C5Acut-off
| ||
7 | Standard discharge
| Constant current 0.2 C5A end voltage 2.0V
|
Charge and Discharge Performance
No.
| Item
| General Parameter
| Remark
|
8 | Fast charge
| Constant Current 1C5A Constant Voltage 3.65V 0.01 C5Acut-off
| |
9 | Fast discharge
| Constant current 1 C5A end voltage 2.0V
| |
10 | Maximum Continuous Charge Current
| 1 C5A | |
11 | Maximum Continuous Discharge Current
| 1.5C5A | |
12 | Operation Temperature Range
| Charge: 0~45℃ | 60±25%R.H. Bare Cell
|
Discharge: -10~60℃ | |||
13 | Storage Temperature Range
| Less than 1 year: -20~25℃
| 60±25%R.H. at the shipment state
|
less than 3 months: -20~40℃
| |||
High: 27.0±0.5 mm | |||
14 | Cell Dimension
|
Feature
1. High capacity 20ah for one cell, you can assembled higher capacity with less single cell
2. 3.2V standard voltage meet various equipment
3. Wide range of operating temperature; 0-45 degree,
4. Long operating time 2000times , usually keep 3-5 year
6. Low self-discharge rate (less than 2% per year at 20°C).the battery remain capacity is 70% for original capacity after stock one year
Main Applications :
The high capacity lifepo4 cell can be used for various EV E-CAR portable ESS
solar power solutions
Charge station
Packing for LiFePO4 Battery Prismatic Type 3.2V 20AH 92108250 For Energy Storage System:
The battery put in plastic pallet one by one avoid short circle
Available Model for the LIFePO4 Button Cell:
model | size | capacity |
LPF92108250 3.2V 20AH | 9.2*108*250mm | 20ah |
LPF85200235 3.2V 21AH | 8.5*200*235mm | 21ah |
LPF09185190 3.2V 25AH | 9*185*190mm | 25ah |
LPF27135206 3.2V 60AH | 2.7*135*206mm | 60ah |
Cautions in use
To ensure proper use of the battery please read the manual carefully before using it.
. Handling
. Storage
. Disposal
Battery operation instruction
Discharging current
The discharging current does not have to surpass this specification book stipulation the biggest discharging current, the over sized electric current electric discharge can cause the battery capacity play to reduce and to cause the battery heat.
Electric discharge temperature
The battery discharge must carry on in the ambient temperature scope which this specification book stipulated.
Storing the Batteries
The battery should store in the product specification book stipulation temperature range. If has surpasses above for six months the long time storage, the discharge capacity will decrease sharply.
Period of Warranty
Because batteries utilize a chemical reaction, battery performance will deteriorate over time even if stored for a long period of time without being used. In addition, if the various usage conditions such as discharge, ambient temperature, are not maintained within the specified ranges the life expectancy of the battery may be shortened or the device in which the battery is used may be damaged by electrolyte leakage. Please change the battery in time.