Feature:
1. Standard module with continue order to keep quickly delivery
2. The standard size for the battery pack:Max 53mm*29.6mm*68mm
3. This single cell for the pack is a level energy type IFR26650 3.3Ah
4. Long cycle life is about 2000 times with DOD 80%
5. Through certification:UN38.3,ICE62133,RoHs for Cell
6. Low self-discharge less than 3% monthly to keep longer stock time
No. | Item | General Parameter | Remark |
1 | Rated Capacity | 3.3Ah | Standard discharge(0.2 C5)after standard charge(0.2 C5) |
2 | Minimal Rated Capacity | 3.2Ah | |
3 | Nominal Voltage | 6.4V |
|
4 | Life Exception | Higher than 80% of the Initial Capacity of the Cells | ◆Charge: CC@0.2C to 7.3V, then CV till current to 0.05C ◆Rest: 30min. ◆Discharge: 0.2C to 5.0V ◆Temperature:20±5℃ ◆Carry out 1200cycles 100%DOD |
5 | Discharge cut-off voltage | ≥4.6V | 5.0V( recommended) |
6 | Charging cut-off voltage | ≤7.3V | 7.3V (recommended) |
7 | Cell and assembly method | IFR26650EC-3.3Ah | 2S1P |
8 | Housing material | PVC |
|
9 | Standard charge | 0.2C constant current(CC) charge to 7.3V,then constant voltage (CV)7.3V charge till charge current decline to ≤0.05C | Charge time : Approx 7h |
10 | Standard discharge | Constant current 0.2C Cut-off voltage 5.0V |
|
11 | Maximum Charge Current | 2A | 1.5A(recommended) |
12 | Max Continuous Discharge Current | 2A |
|
13 | Max Continuous Output power | 15W |
|
14 | Operation Temperature Range | Charge: 0~45℃ | 60±25%R.H. 23 ± 5°C( recommended) |
Discharge: -10~60℃(cell surface temperature≤80℃) | |||
15 | Storage Temperature Range | Less than 1 year : 0~25℃ | 60±25%R.H. at the shipment state 23 ± 5°C( recommended) |
Less than 3 months:-10~35℃ | |||
16 | Weight | Approx: 180g | IFR26650EC-3.3Ah |
17 | Max. Dimension | Height:53.0mm | Type of terminal: VHR-2N |
Width:29.6mm | |||
Length: 68mm |
The battery pack can used be various equipment including of below
put the battery pack into sponge bag one by one , and put the bag in hard paper inner box
and then 5-8 box for one standard carton
If you hope to assembled the battery pack by yourself ,pls pay close to below information
a. Select capacity, same capacities cells for one pack
b. Measure the voltage, same voltage cells for one pack(difference is under 0.02v per cell)
c. Measure the inner resistance,same IR cells for one pack (difference is under 1m Ohm)
All above steps are very strict to make sure the pack performance is perfect.
d. choose the excellence PCB with balance performance