NO | Project | Qualification | Remarks |
2.1 Technical requirements for battery module | |||
2.1.1 | Minimum capacity | Rated capacity*97% | 0.5C/25℃ |
2.1.2 | Rated capacity | 100Ah | |
2.1.3 | Nominal voltage | 51.2V | 16 Series |
2.1.4 |
Chassis dimensions | ||
2.1.5 |
Chassis material | Q235 | |
2.1.6 |
Waterproof grade | IP30 | |
2.1.7 |
Charging maximum voltage | 58.4V | 3.65V/pcs |
2.1.8 |
Discharge minimum voltage | 40V | 2.5V/pcs |
2.1.9 |
Standard charging current | 0.33C | |
2.110 |
Max continuous charging current | 1C |
|
2.1.11 |
Standard discharge current | 0.33C | |
2.1.12 |
Max continuous discharge current | 1C | |
2.1.13 |
Cycle life | ≥3000 cycles |
0.2C charging, discharge/25℃/ 80%DOD |
2.1.14 |
Weight | 45.0KG |
(based on the actual weight of the product) |
2.1.15 |
Discharge operating temperature range | -20~+65℃ | Try to avoid the battery being exposed to high temperature (≥35℃) for a long time. High temperature and low power will easily lead to accelerated degradation of battery performance. |
2.1.16 |
Storage temperature | -20~+50℃ | SOC40~60% |
2.1.17 |
Relative humidity | 5~95% |
No condensation, battery system working properly |
2.1.18 |
Height | <3600m | |
2.1.19 |
Quality guarantee period |
3 years |
3-year free warranty maintenance |
2.1.20 |
Shipment with electricity | SOC:20%-60%: | 51V-52.8V |
2.1.21 |
communication port. | RS 232*1+CAN*2 | |
2.1.22 | Run, alarm LED light display | LED light (green,red) | |
2.1.23 | Anti-theft function | Not | |
2.1.24 | Communicating protocol | CAN protocol | |
2.1.25 | Charging limit current | 20A | |
2.1.26 | Reverse protection | Not | |
2.1.27 | Dial switch | 6 bit binary | |
2.1.29 | Display screen | Yes | |
2.1.29 | Dry connect | Not | |
2.1.30 | Capacitive load | 30000uF(Max) | |
2.1.31 | Heating film | 200W |
6.Cautions