2000 Times Cycle Battery Rechargeable Battery,12V50AH LifePO4 Battery

About this item

• 【Similar Usable Energy but 5 Times Faster Charging】Our 12V 50Ah LiFePO4 battery has 640Wh energy (12.8V×50Ah×100%DOD=640Wh ), which is close to the real energy of 12V 100Ah lead-acid battery (12V×100Ah×60%DOD=720Wh), as the depth of discharge (DOD) of lead-acid is about 60%. It means 12V 100Ah lead-acid battery can run an 80W load nonstop for 9hrs while 8hrs as our 12V 50Ah lithium battery can do. And it takes 10-20hrs to fully charge a 100Ah lead-acid battery while 1-2.5hrs of lithium battery.
• 【Top Protection & 8 Times Lifespan】LiTime LiFePO4 battery is made of automotive grade LiFePO4 cells, which have a higher energy density, more stable performance & built-in 50A BMS. Compared with the 200-500 cycles and 3-year lifespan of lead-acid battery, our lithium battery has more than 4000 deep cycles and a 10-year lifespan, which means that the lifetime of one of our 12V 50Ah LiFePO4 battery is equivalent to the total lifetime of 3-8pcs 12V 100Ah lead-acid batteries. What a huge difference!
• 【4 Times the Value for Money】LiTime LiFePO4 battery ensures you a 5-year warranty while the best-selling lead-acid battery is only 1 year. In terms of lifetime, the value of our 50Ah lithium iron phosphate battery is almost 4 times than 12V 100Ah lead-acid battery. For example, the cost per use of our LiFePO4 battery is $0.069, but $0.294 for a 12V 100Ah lead-acid battery . Data shows that buying our lithium battery is the best investment for your money.
• SLA / AGM spill proof battery has a characteristic of high discharge rate, wide operating temperatures, long service life and deep discharge recover.
• Rechargeable battery that can be mounted in any position, resists shocks and vibration. Long lasting high performance in high and low temperatures.

2000 Times Cycle Battery Rechargeable Battery,12V50AH LifePO4 Battery

Product information:

Notice for Assembling Battery Pack

• Shocks, high temperature, or contacts of sharp edge components should not be allowed in battery pack assembling process.
• Prevention of short circuit within a battery pack.Enough insulation layers between wiring and the cells shall be used to maintain extra safety protection. The battery pack shall bestructured with no short circuit within the battery pack, which may cause generation of smoke or firing.
• Prohibition of disassembly.Never disassemble the cellsThe disassembling may generate internal short circuit in the cell, which may cause gassing, firing, explosion, or other problems.
• Electrolyte is harmful.LIP battery should not have liquid from electrolyte flowing, but in case the electrolyte come into contact with the skin, or eyes,physicians shall flush the electrolyte immediately with fresh water and medical advice is to be sought