Battery Management System-16S150A-20A

1. Functional Features

Highly Integrated Analogue Front End Adjustable Over-Current Protection

Isolated Power Supply Circuit Multiple Sleep And Wake-Up Modes

Integrated Serial Port IC Low Power Consumption

High Voltage Accuracy (≤10mV) RS485 Communication

High Current Accuracy (≤2%@FS) Adjustable Parameter Settings

4-Way Battery Temperature Detection (≤2°C) Data Refresh Interval (Period) ≤ 2 Seconds

SOC Estimation Function LED Status Indication Function

SOH Estimation Function Charge Equalization Function

Short Circuit Protection Function SOC Accuracy (≤5% @ 50% Capacity Range Or More)

2.Functional Block Diagram

3.Environmental Requirements

4. Precautions For Use

● When soldering the battery leads, it is important not to make any wrong or reversed connections. If you do make a wrong connection, the board may be damaged and needs to be retested before it can be used.

● The protection plate should not come into direct contact with the surface of the cell during assembly to avoid damage to the cell. The assembly should be solid and reliable.

● Take care that the lead head, soldering iron and solder do not touch the components on the board during use, otherwise there is a risk of damage to this board.

● The use process should be anti-static, moisture-proof, water-proof, etc.

● Please follow the design parameters and conditions of use and do not exceed the values in this specification, otherwise there is a risk of damage to the protection plate.

● After combining the battery pack and the protection board, if you find there is no voltage output or it cannot be charged when you first power up, please check if the wiring is correct.