12AH IFR32700 1S2P 3.2V LiFePO4 Battery For Solar Powered Electric Fencing.
1. Nominal Capacity:12AH
2. Voltage:3.2V
3. Delivery voltage≥ 3.28 V
4. Battery SOC:Appr 30%
5. Max continuous charge current:2A
6. Max continuous discharge current:2A
7. Connector:JST PHR-3P
PCM information
No | Item | Condition | Specification |
1 | nput Voltage | input Voltage B+ to B- | -0.3~+10V |
2 |
Overcharge | Detection voltage | 3.75±0.05V |
3 | Release voltage | 3.6±0.1V | |
4 | Detection delay time | 0.08~0.2S | |
5 |
Over discharge | Detection voltage | 2.1±0.1V |
6 | Release voltage | 2.3±0.1V | |
7 | Detection delay time | 40.00~120.00ms | |
8 |
Over discharge current | Over current | 3~5A |
9 | delay time | 10.00~20.00ms | |
10 |
Short detection | Short detection delay time | 50~300us |
11 | Release Conditions | Cut off load | |
12 |
Charge temperature protection | Charge temperature protection | NO |
13 |
Discharge temperature protection | Discharge temperature protection | NO |
14 |
Normal current consumption |
Normal current consumption of PCM | Max 8.00uA |
15 | 0V charger | allowed 0V change | YES |
16 |
Suggest working conditions | max continuous charge/discharge current | 2A |
17 | suggest working temperature | -20℃~+60℃ | |
18 | IR resistance | IR of PCM | ≤70.00 mΩ |
19 | PTC | Continuous current | 3.0A |
6.0A | |||
20 |
The size of final PCM | The length of final PCM | 36±0.15mm |
21 | The width of final PCM | 5.1±0.1mm | |
22 | The thickness of final PCM | MAX:2.2mm | |
21 |
Appearance | Nothing part deflection The status of solder is all right PCM will not crook Settle for TDT Module appearance standard | |
22 | Reliability test | 1) ESD 4KV 8KV / ESD test :contact 4KV Air 8KV |
12AH IFR32700 1S2P 3.2V LiFePO4 Battery For Solar Powered Electric Fencing.
|
No | Working temperature |
Charging Spec |
Discharging Spec |
1 |
-20oC to 0oC | Charge current limited to 0.1C(1.2A) or | Suggest discharge current limited to 0.2C or |
2 | 0oC to 45oC | Charge current within spec | Discharge current within spec |
3 |
45oC to 70oC | Charge current limited to 0.1C(1.2A) or below Cut off voltage 3.60Vor below |
Suggest discharge current limited to 0.2C or below |
|