Specifications
Brand Name :
Takfly
Model Number :
TKSFPP8510GSR
Certification :
CE,ROHS,FCC,REACH,ISO9001,ISO14001
Place of Origin :
China
MOQ :
1 piece
Price :
USD 6~ USD 10
Payment Terms :
T/T, Western Union, MoneyGram, Paypal, L/C
Supply Ability :
30000pcs/month
Delivery Time :
3-5 working days
Packaging Details :
blister box + spone + carton
Speed :
10Gbps
Transmission Distance :
300M
Fiber Mode :
Multimode
Compatible Switch Brand :
CISCO/HP/Huawei/H3C/Juniper/ZTE/........
Grade :
Commercial Grade/Industrial Grade
Wavelength :
850nm
Description

10Gbps 850nm 300M SFP+ Optical Transceiver Module compatible with CISCO / HP / H3C / Juniper / Huawei

Description

This 850 nm VCSEL 10Gigabit SFP+ transceiver is designed to transmit and receive optical data over 50/125μm or 62.5/125μm multimode optical fiber (Table 1).
Fiber Type Minimum model bandwidth @850nm(MHz-km) Operating range (meters)
62.5um MMF 160 2~26
200 2~33
50um MMF 400 2~66
500 2~82
2000 2~300

The SFP+ SR module electrical interface is compliant to SFI electrical specifications. The transmitter input and receiver output impedance is 100 Ohms differential. Data lines are internally AC coupled. The module provides differential termination and reduce differential to common mode conversion for quality signal termination and low EMI. SFI typically operates over 200 mm of improved FR4 material or up to about 150mmof standard FR4 with one connector.
The transmitter converts 10Gbit/s serial PECL or CML electrical data into serial optical data compliant with the10GBASE-SR standard. An open collector compatible Transmit Disable (Tx_Dis) is provided. A logic “1,” or no connection on this pin will disable the laser from transmitting. A logic “0” on this pin provides normal operation. The transmitter has an internal automatic power control loop (APC) to ensure constant optical power output across supply voltage and temperature variations. An open collector compatible Transmit Fault (TFault) is provided. TX_Fault is a module output contact that when high, indicates that the module transmitter has detected a fault condition related to laser operation or safety. The TX_Fault output contact is an open drain/collector and shall be pulled up to the Vcc_Host in the host with a resistor in the range 4.7-10 kΩ.
TX_Disable is a module input contact. When TX_Disable is asserted high or left open, the SFP+ module transmitter output shall be turned off. This contact shall be pulled up to VccT with a 4.7 kΩ to 10 kΩ resistor The receiver converts 10Gbit/s serial optical data into serial PECL/CML electrical data. An open collector compatible Loss of Signal is provided. Rx_LOS when high indicates an optical signal level below that specified in the relevant standard. The Rx_LOS contact is an open drain/collector output and shall be pulled up to Vcc_Host in the host with a resistor in the range 4.7-10 kΩ, or with an active termination. Power supply filtering is recommended for both the transmitter and receiver. The Rx_LOS signal is intended as a preliminary indication to the system in which the SFP+ is installed that the received signal strength is below the specified range. Such an indication typically points to non-installed cables, broken cables, or a disabled, failing or a powered off transmitter at the far end of the cable.

Features

  • Optical interface compliant to IEEE 802.3ae
  • Electrical interface compliant to SFF-8431
  • Hot Pluggable
  • 850nm VCSEL transmitter, PIN photo-detector
  • Maximum link length of 300m on 2000MHz/km MMF
  • Operating case temperature: 0 to 70 °C
  • Low power consumption
  • Maximum link length of 300m on 2000MHz/km MMF
  • All-metal housing for superior EMI performance
  • Advanced firmware allow customer system encryption information to be stored in transceiver
  • Cost effective SFP+ solution, enables higher port densities and greater bandwidth
  • RoHS6 compliant (lead free)​

Applications

  • 10GBASE-SR at 10.3125Gbps
  • 10GBASE-SW at 9.953Gbps
  • Other optical links​

Absolute Maximum Ratings

Parameter Symbol Min. Typical Max. Unit
Ref.
Maximum Supply Voltag
Vcc
-0.5
4.7
V
Storage Temperature
TS -40 85
°C
Case Operating Temperature
Tcase
-5 70 °C


Dimension

Comply to SFF-8432 rev5.0, the improved Pluggable form factor specification.
10g Sfp+ Transceiver 850nm 300M Optical Transceiver Module Compatible With Juniper Huawei
10g Sfp+ Transceiver 850nm 300M Optical Transceiver Module Compatible With Juniper Huawei
10g Sfp+ Transceiver 850nm 300M Optical Transceiver Module Compatible With Juniper Huawei
Send your message to this supplier
Send Now

10g Sfp+ Transceiver 850nm 300M Optical Transceiver Module Compatible With Juniper Huawei

Ask Latest Price
Brand Name :
Takfly
Model Number :
TKSFPP8510GSR
Certification :
CE,ROHS,FCC,REACH,ISO9001,ISO14001
Place of Origin :
China
MOQ :
1 piece
Price :
USD 6~ USD 10
Contact Supplier
10g Sfp+ Transceiver 850nm 300M Optical Transceiver Module Compatible With Juniper Huawei
10g Sfp+ Transceiver 850nm 300M Optical Transceiver Module Compatible With Juniper Huawei
10g Sfp+ Transceiver 850nm 300M Optical Transceiver Module Compatible With Juniper Huawei

TAKFLY COMMUNICATIONS CO., LTD.

Verified Supplier
5 Years
shenzhen
Since 2000
Business Type :
Manufacturer
Total Annual :
3500000-4000000
Employee Number :
200~300
Certification Level :
Verified Supplier
Contact Supplier
Submit Requirement