1U 19 Rack Mount 8 Channel CWDM Mux Demux Module For Fiber Optical Amplifier

8 Channels 100GHz Mux Demux In 1U 19 Rack With LC UPC or APC Interface For FTTX CATV and Data Center is usually used for long-haul transmission where wavelengths are packed tightly together over the C-band, up to 48 wavelengths in 100GHz grid(0.8nm) and 96 wavelengths in 50GHz grid(0.4nm). It's protocol transparent and suit applications including 10/1G Ethernet, SDH/SONET, 16/8/4/2/1G Fibre Channel, FTTx and CATV.

The term WDM is commonly applied to an optical carrier, which is typically described by its wavelength, whereas frequency-division multiplexing typically applies to a radio carrier which is more often described by frequency

WDM, CWDM and DWDM are based on the same concept of using multiple wavelengths of light on a single fiber but differ in the spacing of the wavelengths, number of channels, and the ability to amplify the multiplexed signals in the optical space. EDFA provide an efficient wideband amplification for the C-band, Raman amplification adds a mechanism for amplification in the L-band. For CWDM, wideband optical amplification is not available, limiting the optical spans to several tens of kilometres.

• Low Insertion Loss
• Wide pass band
• High Channel Isolation
• High Stability and reliability

• Channel Add/Drop
• DWDM Network
• Fiber Optical Amplifier

8 Channels 100GHz DWDM MUX DEMUX Specification:

Remarks: Above specification are for device without connector

8 Channels 100GHz DWDM MUX DEMUX​ Pictures:

Why choose TAKFLY--- Advantages as follows:

Professional manufacturer:

1. More than 21 years manufacturing experience in Fiber optic products-one stop purcharsing.
2. More than 450 assembly workers with 3 years experienced;
3. More than 26 R&D Engineers;
4. 16 Sets Germany imported Injection Machine and More than 10 Cable Production Lines;
5. More than 30 sets of Testing Machines: OTDR,3D,VFL,IL&RL test instrument; tension strenth tester, Crush Resistance tester, Power meter tester, light checker, ect.
6. OEM Brand is acceptable.
7. Exhibition: OFC, ECOC, CommunicAsia, NETCOM, AFRICACOM, SVIAZ ICT, CommunicIndonesia ,Global Soure Electronic Exhibition,etc.
8. After-sales Services: Available for 24 hours.

Quality Control:

1. Spot check the raw material incoming inspection before production;
2. Fully check after every individual process finished;
3. Fully check production half done;
4. Fully check the finished products before packing;
5. Spot check before shipping;

Delivery:

1. Samples: 1-3 working days.
2. Mass Production Order: 3-7 working days.
3. Packaging: Plastic Bag, Carton and Pallet are available according to your request.

Price: If your QTY is big, the price could be negotiated.

I have been working in this field more than 6 years, I believe, I could give you very good service and professional answers!

If you're interested in our products or have any doubt, why not send me inquiry at once?