MTP Male Type Elite Singlemode Loopback G657A1 Fiber Cable
Fiber Optic Loopback Description:
Takfly MTP/MPO Fiber Loopback is used to test the transmitting ability and receiving sensitivity of the network devices, besides it, it is also a reliable product to test the system loop.
MPO MTP Loopback is used widely within the testing environments,s especially within parallel optics 40 and 100G networks. Devices allow verification and testing of transceivers featuring the MPO MTP interface. Loopbacks are built to link Transceivers (TX) and Receivers (RX) positions of MPO transceivers interfaces.
Fiber Optic Loopback Features:
Fiber Optic Loopback Application:
Fiber Optic Loopback Specification:
Optical Parameters | ||||
Insertion Loss (dB) | SM Standard | SM Elite | MM Standard | MM Elite |
≤1.2 | ≤0.5 | ≤1.2 | ≤0.5 | |
Return Loss (dB) | / | / | ||
Durability (dB) | ≤0.2 500 times mating | |||
Tensile Strength (kgf) | 10 | |||
Working Temperature (℃) | -20 ~+70 | |||
Measurement Wavelength (nm) | 1310 | 850 | ||
Geometry Parameters | ||||
Item | X-axis | Y-axis | ||
Min | Max | Min | Max | |
Radius of Curvature (mm) | 500 | - | 50 | - |
Polishing Angle | 0-0.2 | 0+0.2 | 8-0.2 | 8+0.2 |
Item | Min | Max | ||
Fiber Height (nm) | 1000 | 3000 | ||
Max Fiber Height Error (nm) | 600 | |||
Adjacent Fiber Height Error (nm) | -300 | +300 | ||
Avg. Fiber Height Error (nm) | -300 | +300 | ||
Central Concave (nm) | 300 |
Fiber Optic Loopback types:
How to order Fiber Optic Loopback
1. Connector type : SC / FC / LC / ST / MPO / MTP / MU / MTRJ / E2000 / SMA
2. Mode type : single mode ( UPC and APC ) / multi mode ( PC )
3. Cable type : G652D / G657A1 / G657A2 /G655 / OM1 / OM2 / OM3-150 / OM3-300 / OM4 /OM5
4.MPO/MTP connector male or female, fiber count (4/8/12/16/24/32 fiber )