Spray Booth Diesel Burner TG-70C |
|
Inside dimension |
6900×3900×2650mm(L×W×H) |
Outside dimension |
7000×5350×3400 mm(L×W×H) |
Wall panel |
Thickness: 50mm, steel 0.376mm thick width: 1150mm, tongue and groove interlock structure, with Polystyrene (EPS) insulation inside, color: white. |
Doors |
Folding door, 3 folds main door, 3000×2600 mm ( W x H), made by bending steel without cover frame, color : blue. Escape door:1 unit, 650×1800m m ( W x H), color : white. |
Basement |
Galvanized steel assemble,300mm high, quadrate steel support,2 rows of grilles made by flat bar and twisted steel, then painted. 3 rows of indented plates, painted.2 ramps, external setting, 520 x 2000 mm ( W x L )/pc. |
Intake air system |
1x7.5KW turbo fan, total air capacity is 25000 M³/h. Direct drive type |
Exhaust air system |
1x7.5KW turbo fan, total air capacity is 25000 M³/h. Direct drive type. |
Damper actuates |
Pneumatic damper actuates from spraying to baking cycle. |
Heating system |
Riello G20 diesel burner, stainless steel heat exchanger, the Max. Heating productivity : 200000Kcal/h. Max. working temperature:80℃. |
Filter system |
Pre-filter, ceiling filter, exhaust fiberglass filter. |
Filtering area |
21.5M2 |
Lighting system |
Ceiling lights: 8units x 4 pcs =32pcs x 36W. Side lights: 8units x 2 pcs =16pcs x 36W, with electronic ballast. |
Control system |
Spraying, heat spraying, time setting, lighting switch, failure indicator, thermostat, power supply switch, emergency stop. All motors are full voltage start. |
Total power |
17.5KW |