Antifriction Steel Hard Rock Drill Bits For The toughest Drilling Application

Click here for catalogueTCI DRILL BIT.pdf

Advantage:

1. Optimized cutting structure and bearing geometry to distribute load .
2. More uniformly distributed load over bearings.
3. Smoother bit performance .
4. Sustained penetration rate over longer periods of time .
5. Reduced risk of bearing failure .
6. Streamlined lug manages.
7. larger drill cuttings.
8. Higher penetration rate Less regrinding of cuttings to smaller pieces.
9. Less bit wear.
10. Full body armor minimizes wear on bit body and shirttail.

What is Hard Rock Drill Bits

All bits the above are manufactured according to strict standards, set forth by the American Petroleum Institute (API).

And classified according to characteristics set forth by the International Association of Drilling Contractors (IADC).

Hard Rock Drill Bit is cut rock by Tungsten Carbide teeth projecting from rolling cutters, which rotate on the drill-bit bearings. Inturn, the drill bit rotates at a high rate, and presses against the bottom hole with a high axial force. The teeth of the rolling cutters roll over the bottom hole and, owing to the large stresses that develop in the area of contact between the teeth and the rock, cut the rock by crushing and chipping. As the hardness of therock increases, the rotation rate decreases and the axial force increases. Destroyed at the mine the rock is removed to the surface by air compressor, mud pump, or a combination of these methods.All bits the above are manufactured according to strict standards, set forth by the American Petroleum Institute (API). And classified according to characteristics set forth by the International Association of Drilling Contractors (IADC).

How to read an IADC Code properly

Working theory of TCI tricone bit

The medium formation TCI tricone bits features aggressive chisel tungsten carbide inserts on the heel rows and inner rows. This design provides a fast drilling rate and added cutting structure durability in medium to medium hard for mations. The HSN rubber O-ring provides adequate sealing for bearing durability.
Tricone bit is connected with the drill stem and rotates along with it, and drive cones to pressed on the rock. Each cone rotates round the axis of its leg and three cones simultaneously revolve around the bit center. The tungsten carbide inserts on the cone shell cause the formation to spall under the weight on bit and the impact load of cone rotating, the debris will be discharged out to hole by compression air.
The medium formation TCI tricone bits features aggressive chisel tungsten carbide inserts on the heel rows and inner rows. This design provides a fast drilling rate and added cutting structure durability in medium to medium hard for mations. The HSN rubber O-ring provides adequate sealing for bearing durability.

Tianying's Best Service
1. 365×24 Year-round Service,We are committed to year-round 24-hour service even during holidays.
1. Provide professional technical services, including products introduction, selecting and problem solution etc.
3. Within 35 Working Days Quick Delivery.


Our Company
Hunan Tianying Drilling Machine Manufacturing Co., Ltd, supplies tricone drill bits, which are widely used in mining drill. Products offers a complete line of tricone bits, which using the best raw material in the market. Reliable steel, tungsten carbide, bearing and lubrication system, size from 7 7/8”(85.7mm) to 26”(660.4mm) for use in all formations, Our Tricone Bits are with Sealed Bearing, Roller Bearing and Gage Protected which can ensure you can drill more meters.