Polyurethane Rigid Foam Integral Skin Foam for Soft Seats Materials Blend Polyol Isocyanate for Soft Seats
Description
Integral Skin Foam
Component A material (POLY) is polyether polyol mixing additives.
Foaming Parameter
Item | Index |
CT cream time/s | 20-25 |
RT stop foaming time/s | 60-80 |
FBD free foaming density g/cm3 | 130-160 |
Operation Instructions
Before use, thoroughly mix Component A, then add the colorant and an appropriate amount of foaming agent. Stir the mixture evenly and transfer it into the POLY raw material tank for future use.
When using, ensure the raw material temperature is maintained between 20-30°C and the mold temperature between 40-45°C. The recommended ratio of A material to B material is 100:45-47. When adding 0.5% of H002, adjust the ratio to 100:47-49, and continue adjusting as needed.
Notes:
Raw materials should not be exposed to moisture. Store them in a sealed container to ensure proper preservation.