MEAN WELL MOVING SIGN SERIES 150W- 400W Single Output with PFC LSP-150 HSP-200 UHP-200A HSP-300
MEAN WELL MOVING SIGN SERIES 150W- 400W Single Output with PFC LSP-150 HSP-200 UHP-200A HSP-300
Light weight and low profile
Suitable for high efficiency moving sign applications
Conformal coating (HSP, HDP, NEL, HSN series)
Semi-potted and design against rain splash (ERP Series)
Parametets :
MODEL | LSP-160 -3.3 | LSP-160 -4.2 | LSP-160 -5 | LSP-160-12 | LSP-160-24 | LSP-160-36 | LSP-160-48 | |
OUTPUT | DC VOLTAGE | 3.3V | 4.2V | 5V | 12V | 24V | 36V | 48V |
RATED CURRENT | 32A | 32A | 32A | 13.5A | 6.75A | 4.5A | 3.4A | |
RATED POWER(convection) | 105.6W | 134.4W | 160W | 162W | 162W | 162W | 163.2W | |
RIPPLE & NOISE (max.) Note.2 | 200mVp-p | 200mVp-p | 200mVp-p | 240mVp-p | 240mVp-p | 240mVp-p | 300mVp-p | |
VOLTAGE ADJ. RANGE | 3.2~3.5V | 4~4.5V | 4.7~5.3V | 11.4~12.6V | 22.8~25.2V | 34.2~37.8V | 45.6~50.4V | |
VOLTAGE TOLERANCE Note.3 | ±2.0% | ±2.0% | ±2.0% | ±1.0% | ±1.0% | ±1.0% | ±1.0% | |
LINE REGULATION | ±0.5% | ±0.5% | ±0.5% | ±0.3% | ±0.3% | ±0.3% | ±0.3% | |
LOAD REGULATION | ±1.0% | ±1.0% | ±1.0% | ±0.5% | ±0.5% | ±0.5% | ±0.5% | |
SETUP, RISE TIME | 2000ms, 80ms/230VAC 3000ms, 80ms/115VAC at full load | |||||||
HOLD UP TIME (Typ.) | 10ms/230VAC 10ms/115VAC | |||||||
INPUT | VOLTAGE RANGE Note.4 | 100 ~ 264VAC 141 ~ 370VDC | ||||||
FREQUENCY RANGE | 47 ~ 63Hz | |||||||
POWER FACTOR (Typ.) | PF≥0.94/230VAC PF≥0.98/115VAC at full load | |||||||
EFFICIENCY (Typ.) | 87.5% | 88.5% | 89.5% | 92.5% | 93.5% | 93.5% | 93.5% | |
AC CURRENT (Typ.) | 2.2A/115VAC 1.1A/230VAC | |||||||
INRUSH CURRENT (Typ.) | Cold start 45A/115VAC 85A/230VAC | |||||||
LEAKAGE CURRENT | <0.75mA / 240VAC | |||||||
PROTECTION | SHORT CIRCUIT | Hiccup protection,recovers automatically after fault condition is removed | ||||||
OVERLOAD | 110~140% rated output power | |||||||
Protection type : Constant current limiting,continous increase of load will be hiccup protection, recovers automatically after fault condition is removed | ||||||||
OVER VOLTAGE | 3.8~ 4.6V | 4.62 ~ 5.46V | 5.75 ~ 6.75V | 13.2 ~ 15.6V | 26.4 ~ 31.2V | 39.6 ~46.8V | 52.8 ~ 62.4V | |
Protection type :Shut down O/P voltage,re-power on to recover | ||||||||
OVER TEMPERATURE | Shut down O/P voltage, re-power on to recover after temperature goes down | |||||||
FUNCTION | CURRENT SHARING | Please refer to the Function Manual | ||||||
DC OK SIGNAL | Contact rating(max.):15Vdc/10mA resistive load | |||||||
ENVIRONMENT | WORKING TEMP. | -30 ~ +70℃(Refer to “Derating Curve") | ||||||
WORKING HUMIDITY | 20 ~ 90% RH non-condensing | |||||||
STORAGE TEMP., HUMIDITY | -40 ~ +85℃, 10 ~ 95% RH non-condensing | |||||||
TEMP. COEFFICIENT | ±0.03%/℃ (0 ~ 50℃) | |||||||
VIBRATION | 10 ~ 500Hz, 5G 10min./1cycle, 60min. each along X, Y, Z axes | |||||||
SAFETY & EMC (Note.6) | SAFETY STANDARDS | UL62368,TUV BS EN/EN62368, CCC GB4943, EAC TP TC 004, BSMI CNS14336-1 approved, Design refer to BS EN/EN60335-1 | ||||||
WITHSTAND VOLTAGE | I/P-O/P:3.75KVAC I/P-FG:2KVAC O/P-FG:1.25KVAC | |||||||
ISOLATION RESISTANCE | I/P-O/P, I/P-FG,O/P-FG:100M Ohms/500VDC/25℃/ 70%RH | |||||||
EMC EMISSION | Compliance to BS EN/EN55032,GB9254,Class B, BS EN/EN55014,BS EN/EN61000-3-2,-3,EAC TP TC 020,BSMI CNS13438 | |||||||
EMC IMMUNITY | Compliance to BS EN/EN61000-4-2,3,4,5,6,8,11;BS EN/EN61000-6-2 (BS EN/EN50082-2), heavy industry level ,EAC TP TC 020 | |||||||
OTHERS | MTBF | 2092.7K hrs min. Telcordia TR/SR-332(Bellcore) ;282.7K hrs min. MIL-HDBK-217F (25℃) | ||||||
DIMENSION | 194*55*20mm (L*W*H) | |||||||
PACKING | 0.356kg;30pcs/11.68kg/0.6CUFT | |||||||
NOTE | 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance: includes set up tolerance, line regulation and load regulation. 4. Derating may be needed under low input voltages. Please check the derating curve for more details. 5. The ambient temperature derating of 5℃/1000m is needed for operating altitude greater than 2000m(6500ft) 6. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies.” (as available on http://www.meanwell.com) ※ Product Liability Disclaimer:For detailed information, please refer to https://www.meanwell.com/serviceDisclaimer.aspx |
Solutions
We provide a complete solutions including site survey, propose professional plan according to customer’s request ,technical support, and maintenance service for Telecommunication Companies in and out of China. We have a competent team and a network of trusted Partners around the world.
FAQ :
1. How do you control the quality?
A:All products before the shipment are simulated usage scenarios, load and full load and current sharing test to ensure the quality of the product.
2. What is your minimum order quantity?
A:There is no minimum order quantity, and one can also be done. The only difference is the price and schedule.
3. Can you introduce your company?
A:I am very honored. I will send you the company’s introduction document later to give you a more comprehensive and direct introduction to our company’s information.
4. What are the advantages of your company?
A:Adequate inventory, and supply guarantee for the subsequent renewal of supply, flexible provided according to different to different needs of customers, providing different solutions.
5. Can i send samples?Report it to me along with the price?
A:You can send samples, the samples are subject to large pride, and the freight needs to be borne by you.
6. How do your company deal with the problem on quality?
A:Our company has been doing this industry for almost 10 years. It has already had a certain reputation. We will carefully analyze it. If it is indeed our quality problem, you can rest assured that it will do things according to the contract agreement and will never let you have any after the worries, our service team will be happy to serve you.
7 What about the quality ?
A:100% original with new package. we will test each item before posted to make sure each item with good quality.
8 How many months for guarantee ?
A: 1 year quality guarantee
9 How to deal with any inferior -quality goods ?
A: Goods can be post by with our charge of post fee for any bad quality products within guarantee time.