The rectifier module output current regulation and communication interruption are as follows:
The output current of the rectifier module can be adjusted according to the current command. The adjustment range of BR483000 is 1A~50A, the adjustment range of BR241800 is 1A~60A.
Communication fault more than 1 minute (Rectifier and Control monitor),A .Rectifier
module output Voltage automatic recovery default Voltage (BR483000 is 53.5V, BR241800 is 24V) and limited current
function not working;b.if the rectifier modules are controller by monitor and Power off, then
rectifier system will power on(if the rectifier fault, it can not be turned on again)
BR241200
Input Feature
Input | Single input |
Input Voltage Range | 90Vac to 290Vac |
Rate input Voltage | 110Vac / 220Vac |
Normal Input | 100Vac to 240Vac |
Frequency Range | 45Hz-65Hz |
Max Input Current | 6.82A±10%@176Vac/1200W |
Surge Current | Compliant Standard:ETSI300132-3 |
Efficiency | ≥90%@220Vac@ 220Vac 100% load |
PF | ≥0.99@220Vac/40A |
Leakage Current | <3.5mA@264Vac |
Input Fuse | L Wire ,Fuse 25A |
Max input Voltage | 310Vac |
Output Feature
Output Voltage | +24Vdc |
Output Voltage Regulation | +24±0.1Vdc |
Output Range adjustable Range | +21Vdc~+29Vdc |
Load sharing(50%~100% Loading) | ≤±5% |
Line regulation | ±0.1% |
Load regulation | ±0.5% |
Voltage precision | ±0.6% |
Min-current | 0A |
Rate current | 40A |
Peaking current | 44A |
Tempe. coefficient(1/℃) | ≤±0.02% |
Rate Capacity | 1200W(150Vac~290Vac) 600W(90Vac~150Vac) |
BR483000
Input Feature
Input | Single-phase two-wire |
Input Voltage | 90Vac to 290Vac,90Vdc to400Vdc |
Rate input Voltage | 220Vac |
Frequency Range | 45Hz-65Hz |
Max input Current | 18.5A±10%@155Vac/50A |
surge current | Compliant standard :ETSI300132-3 |
Efficiency | ≥93%@220Vac 100% Load |
PF | ≥0.99@220Vac/50A |
Leakage current | <3.5mA@264Vac |
Rate capacity | 2900W(154Vac~290Vac)(215Vdc-400Vdc) 1200W(90Vac~154Vac)(90Vdc-215Vdc) |
Input Protection | L line ,Fuse 25A |
Max Input Voltage | 320Vac(Power cannot be damaged) |
Output Feature
Output Voltage | +53.5Vdc |
Output Default Voltage | +53.5±0.1Vdc |
Output Voltage adjust range | +43Vdc~+58Vdc |
Efficiency | ≥92%@220Vac 50-100% Load ≥93.2%@peak value |
Load sharing(50%~100% Loading) | ≤±5% |
Line Regulation | ±0.1% |
Load Regulation | ±0.5% |
Voltage Regulated Accuracy | ±0.6% |
Min- Current | 0A |
Rate Current | 50A |
Peaking Current | ≤55A |
Tempe. coefficient(1/℃) | ≤±0.02% |