3 Legged Lattice Steel Tower Free Standing with Height 90m for Telecommunication Antenna Supporting

1. Production decription

This lattice steel tower is a triangle tower made of equal angle .It is used for telemmunication antenna supporting.

Its prameters as followings :

1. The design data of the lattice steel tower :

Design code :TIA-222G

Wind speed :3 second gust /160KMH

Rest platform :every 15m

Working platform :2

2. Lattice tower Material

Mild steel :S235JR ,Min yield strength 235 N/mm²

High tensile steel :S355JR Min yield strength 355N/mm²
Bolts and nuts :ASTM A325

3. Surface treatment :

Hot diop galvanization :Accorfing to ASTM A123

Painting :Epoxy paint

4. Mounting pole :3m

This kind of lattice steel tower is one of our main product,we can manufacture it according to your drawing or

design as your requirment .

Qingdao Liangta Steel Structure Co., Ltd. ,established in year 2009,is a leading professional manufacturer

in the field of transmission steel towers (the voltage up to 1000kv), telecommunication towers, monopoles,

substation structures and rooftop towers. We also supply steel profile products as per customers 'requirement.

The factory located in Jiaozhou bay of Qingdao, covered an area of over 60,000 square meters with an annual

production capacity 40,000 tons.

Location:
Less than one hour drive from Qingdao International Airport, 1 hour drive from Qingdao sea port.

• Qualification Certificates:
• -Environmental Management System Certificate: ISO14001:2015
• -Quality Management Systems Certificate: ISO9001:2015
• -Established Occupational Health and Safety Management Systems Certificate: OHSAS 18001:2007

We also have many experiences of foreign projects, like Philippines, Myanmar, Iraq, Mauritania and so on.

Welcome to contact us ,we make sure your every question will be answered in time .

2. Product capacity

We have 5 production line for manufacturing lattice steel towers ,We can supply 3000 tons steel towers

per month .And we have enough room to place more steel towers production line if needed .

​

​3. Technical support

Our engineer and drawer has lots of designing ,lofting experience of transmission steel towers .

Which we can supply a overall solution of all the towers .

4. Quality control

We have very strict quality control in every lattice steel towers .

Material incoming control:chemical and physical test

Zinc coating thinknes inspection

We usually has two ways of trial assembly for lattice steel towers : trial assembly before galvanzation

and after galvanization

6. Hot dip galvanization and painting

7. Package and delivery

Package we usually do as our clients requirment .Usually for lattice steel towers,we fixed angle steel by

steel wire to bundles and use special material to protect zinc .

For fasteners ,we use bucket ,bag or box.

8. Product catalogue: