Electric Transmission Line Lattice Steel Tower Angular Power Tower

1. Production decription

Qingdao Liangta Steel Structure Co.Ltd is a professional manufacturer in lattice steel tower from the year 2009.

1. We make sure every your requirement will be answered in 24 hours.

2. Customized design is available.our engineer can design drawings as your requirment.

3. After sales service. We can help to install the transmission tower .If needed ,we even can supply

an engineer to the site.

As an honest seller, we always use superior raw material, advanced machines, skilled technicians

to ensure our products to be finished in high quality and stable feature.

Certificate as following:

2. Product capacity

We have 5 auto production line for Lattice steel towers Manufacturing,We can supply 2000 tons lattice steel tower

every month .Else we have enogh site for installing more production line if needed.

​

​3. Technical support

Our engineer and drawer has lots of designing ,lofting experience of transmission steel towers .

Which we can supply a overall solution of all the towers .

4. Quality control

We have very strict quality control in every tranmsission steel towers .

Material incoming control:chemical and physical test

Zinc coating thinknes inspection

Product Quality Control of the Tower Fabrication Processing

From product raw materials procurement to the final products packages and transport, Qingdao Liangta Steel

Structure Co.,Ltd.control the quality by a sound tower processing and quality management system to ensure that

the incoming qualified 100%,products quality 100%.

Raw material incoming inspection

Liangta inspect all the angle steel materials before incoming, First, we ask the supplier to supply products certificate and quality assurance.

Then we make strict measurement on contour dimension inspection, chemical element analysis and mechanical property test .

We have a special physical and chemical room, equipped with WHV-201 Computers Digital Carbon and Sulfur Analyzer, Visible spectrophotometer, universal material testing machine and so on. we can do C, S, Si, Mn, P chemical element analysis and tensile testing according to the YB/4163—2007.We refuse to receive the materials below standards.

We usually has two ways of trial assembly for tranmsmission steel towers : trial assembly before galvanzation

and after galvanization.

6. Hot dip galvanization and painting

7. Package and delivery

Package we usually do as our clients requirment .Usually for transmission steel towers monopole,we protect the

Flange or overlapping place by plastic bags or old tyre.

8. Company introduction

Qingdao Liangta Steel Structure Co., Ltd. ,established in year 2009,is a leading professional manufacturer in the field of transmission steel towers (the voltage up to 1000kv), telecommunication towers, monopoles, substation structures and rooftop towers. We also supply steel profile products as per customers 'requirement.

The factory located in Jiaozhou bay of Qingdao, covered an area of over 60,000 square meters with an annual production capacity 40,000 tons.

Location:
Less than one hour drive from Qingdao International Airport, 1 hour drive from Qingdao sea port.

• Qualification Certificates:
• -Environmental Management System Certificate: ISO14001:2015
• -Quality Management Systems Certificate: ISO9001:2015
• -Established Occupational Health and Safety Management Systems Certificate: OHSAS 18001:2007

We also have many experiences of foreign projects, like Philippines, Myanmar, Iraq, Mauritania and so on.

Welcome to contact us ,we make sure your every question will be answered in time .

9. Product catalogue: