3000Psi Hollow Bore Stainless Steel Hydraulic Cylinders With Servo Sensor Sfhsg

The cylinder SFHSG series had magnetostrictive displacement sensor inside and with compact structure. The installation place is near to the normal cylinders.
Based on the character of servo cylinder,
1. we improved the design of sealing system, let the piston rod get the best oil film, to ensure the dynamic quality of servo cylinder under high pressure and bad condition.
2. Regarding the material of piston rod, we changed normal standard to higher standard and chroming, to improve the performance of anti-bending, anti-rust, wear-resisting and anti-damage.
3. Improve the surface roughness grade of cylinder bore and piston rod, satisfy the comprehensive performance of servo cylinder with low friction, no crawling and fast response. To improve the reliability and service life.

Product Application

Hydraulic Cylinder

(we produce as per client’s drawing or design with technical requirements.)

Advantages

Very reliable anti-leakage features

Consistent, temperature-independent, material-friendly damping

Visually appealing and robust construction

For use under the harshest conditions

Low-temperature service

Long bearing life

Good cost-effectiveness for the customer

Heavy-duty design with smooth radius transitions

Can be used for high bearing load

Quality Control:
1. The mechanical properties and chemical elements of the raw material will be inspected to check whether qualified after entering the warehouse.
2. Chemical composition inspection of raw materials, Test the chemical composition of metallic materials, such as C, Si, Mn, P, S, Cr, Ni and other elements. Mainly for raw materials incoming inspection, by testing whether the material qualified, receiving materials.
3. Metallographic analysis of metal materials is usually the raw materials, such as copper, iron, aluminum, magnesium, zinc, titanium, etc., for the processing of structural parts and finished product evaluation, through the metallographic analysis, You can find a variety of possible reasons for failure analysis in time, Prediction and analysis the characteristics of metallic materials and materials, Study material surface, and internal defects, and to improve and verify the process technology of the material;
4. Salt spray test is a major use of salt spray test equipment created by the artificial simulation of salt spray environmental conditions to assess the corrosion resistance of products or metal materials, environmental testing