High Pressure FC Front Lifting Telescopic Hydraulic RAM for Dump Truck Tipper
Products Discription:
HS Code | 8412210000 |
Working pressure | 16-32MPa |
Gland | High grade ductile iron |
Tube | Cold drawn honed tubling |
Piston | High grade ductile iron |
Piston rod | Chromed C45 |
End cap | Casting seel |
Gland seals | Polyurethane U-cup |
Rod wiper | Urethane snap in |
Delivery time | 20- 25 working days after payment |
For the selection of hydraulic cylinders, we generally use the hydraulic cylinder in the process of which will be in accordance with the diameter, stroke, the use of pressure, the type of installation to select the hydraulic cylinder, in addition to these in addition to the following points is worth our attention to, first of all hydraulic cylinder After the load speed reaches a certain standard above, you must use the hydraulic cylinder with a buffer device. Or to reach higher speeds must be in the hydraulic cylinder, the installation of deceleration valve. Followed by carefully selected hydraulic oil and seal. Different hydraulic oil droplets with different seals, to ensure the life of the hydraulic cylinder.
Because the hydraulic cylinder to withstand a lot of pressure, the heavier the load, the greater its pressure, therefore, do a good job of hydraulic cylinder maintenance is the most important part of the entire hydraulic system maintenance.
we can customized any size as your request.

An experienced engineer in the design of hydraulic cylinder,we need the following parameters:
- Bore,rod diameter,travel
- Working pressure or cylinder load
- Working temperature
- Working medium
- Running speed
- Other parameters, such as connection form, installation size.
