Single Acting 10 inch hydraulic Ram 3-5 Stages for Dump Truck Trailer

Not only we could manufacture all kinds of hydraulic cylinders according to the drawing from us customers, but also, we could make a design according to customer's requirements. If you

require our engineer to make a design advise us the following specification:

About us

We are a manufacturer of Multi Stage Hydraulic cylinder with well-equipped testing facilities and strong technical force. With a wide range, good quality,reasonable prices and stylish designs, our products are extensively used in cylinder and other industries.

Our products are widely recognized and trusted by users and can meet continuously changing economic and social needs. We welcome new and old customers from all walks of life to contact us for future business relationships and mutual success!

Quality Control:

1 The mechanical properties and chemical elements of the raw material will be inspected to check whether qualified after entering the warehouse.

2. Chemical composition inspection of raw materials, Test the chemical composition of metallic materials, such as C, Si, Mn, P, S, Cr, Ni and other elements. Mainly for raw .materials incoming inspection, by testing whether the material qualified, receiving materials.

3. Metallographic analysis of metal materials is usually the raw materials, such as copper, iron, aluminum, magnesium, zinc, titanium, etc., for the processing of structural parts and finished product evaluation, through the metallographic analysis, You can find a variety of possible reasons for failure analysis in time, Prediction and analysis the characteristics of metallic materials and materials, Study material surface, and internal defects, and to improve and verify the process technology of the material;

4. Salt spray test is a major use of salt spray test equipment created by the artificial simulation of salt spray environmental conditions to assess the corrosion resistance of products or metal materials, environmental testing

5. Mechanical performance testing equipment can meet the requirements of mechanical testing, all the use of computer digital display, so the accuracy is more accurate so that the mechanical properties of each cylinder barrel has been greatly improved.

6. Every workpiece is machined according to the confirmed drawings and will be inspected casually by QC according to a certain proportion. The traceable record shall be clear and traceable.

7. The qualified parts are assembled into one cylinder and then the pressure test will be done.

Before and after assembly, the basic dimensions and workmanship will be inspected again.

8. An inspection report will come into being before delivery.