Chem-Dry Dehydration High Temperature 210 Liter Laboratory Vacuum Drying Oven

Chem-Dry Dehydration High Temperature 210 Liter Laboratory Vacuum Drying Oven is a kind of oven that drying materials
under negative pressure.It uses vacuum pump to extract the air and moisture in the test area of the oven, so that the test area forms a vacuum state, speed up drying.

Vacuum Oven, the material is to be dried under vacuum conditions, heating and drying. Use vacuum pump to pump air and humidity out, make the working room form vacuum, speed up the drying speed.

1. When the heating temperature constant, increase the degree of vacuum, can speed up the drying rate.
2. When the vacuum is constant, increase heating temperature, can speed up the drying rate.
3. Both to improve the degree of vacuum, and improve the heating temperature, greatly speed up the drying rate.

Chem-Dry Dehydration High Temperature 210 Liter Laboratory Vacuum Drying Ovenis widely applied to circuit boards, electronic component, photoelectric device, electroplating metal,plastic chemical industry, printing industry, processing coating, ceramic glass and transformer,inductance coil, motor coil baking, drying, aging, etc.

Under Vacuum condition, the boiling point of materials solution is reduced. So to a certain amount of heat transfer, it saves the evaporator heat transfer area.

Heat source for operation of evaporation can use low-pressure steam or waste heat steam.

The heat loss of the evaporator can be reduced.

Used in drying of decompose and polymerize and deterioration of heat-sensitive materials at high temperature.

Before drying can be disinfected, the drying process were not mixed with any impurities

It is a static vacuum dryer, compact solid dry material is not damaged.

International high quality certification product chain
Manufacturer, more reasonable price
Solid technical support and after-sales service
Uphold the principle of “Customer Supreme”( Balance payment after equipments run normally)
Exports to more than 42 countries and regions, good customers feedback
One-stop service, customized exclusive project feasibility report

​

Export Standard Wooden Box

Can be used for Sea, Air, Railway, Truck transportation

LIB test chambers accept and approved by CE, CSA, RoHS, TUV, SGS and ISO17025 calibration.Once test Chambers completed, our engineers will commisioning ,calibrate,check and accept in our factory. After that pack, and arrange delivery.

More products welcome to consult!
Our main products included temperature and climate test chambers, corrosion chambers, weathering testers, IP dust and rain chambers, ozone test chamber, noxious gas SO2 H2S chamber, walk-in chambers.

Contact us now,Attach silicone sealing ring!