Industrial High Temperature Controlled Environmental Simulation Chamber

►Introduction for Calibration Climatic Chamber Cold Temperature Aging Test Chamber Laboratory

Products you may use every day undergo this testing. Examples include: car parts, cell phones and other electronics, kitchen appliances, makeup, and hand soap. Some of those countless industries that rely on environmental testing include: medicine, pharma, food processing, food packaging, consumer goods and services, automotive, engineering, and construction.

►Application for Calibration Climatic Chamber Cold Temperature Aging Test Chamber Laboratory

Industrial High Temperature Controlled Environmental Simulation Chamber is also called environment testing machine, used to test various types of materials for their tolerances of heat, cold, dry, humidity. It is applied for quality inspection for all types of electronic products, electric appliance, and products from communication, instrument, automobile, plastic, metal, food, chemical, building materials, medical and aerospace industries.

►Advantages for Calibration Climatic Chamber Cold Temperature Aging Test Chamber Laboratory

1.Wide temperature/humidity ranges and volume selection
2.Temperature control and display unit
3.PID programmable color touch screen controller, network connection computer Multi-language interfaceUSB and Ethernet
4.A standard test hole, located at the left side of the work room
5.Water re-circulation system that reduced water use and a series of water pipes
6.Mechanical compression refrigeration system
7.Low temperature can cool down to -70℃
8.Long time to perform 85℃ 85%RH test
9.The Refrigerant can be replaced by R449A/R508B
10.CE mark

11.Long time to perform 85℃ 85%RH test

12.Temperature control and display unit Humidity control and display unit

►Main Parameter for Calibration Climatic Chamber Cold Temperature Aging Test Chamber Laboratory

►Main Details for Calibration Climatic Chamber Cold Temperature Aging Test Chamber Laboratory

1.Cable Hole A standard test hole, located at the left side of the work room, is provided with a sleeve inside to prevent moisture from entering the insulation layer. Equipped with flange. The standard inner hole diameter is 50mm. Soft silicone plug seal; Metal enclosure closed, beautiful designed.	2.Temperature and Humiditty Sensor PT-100 Class A sensor, real-time accurate detection and display of temperature changes at 0.001 degrees.

3.Workroom The internal material is 304 stainless steel, mirror surface, rust-proof to high and low temperature and moisture corrosion; Nice ruggedness and long life.

4.Cooling System After the liquid refrigerant absorbs the heat of the cooled object in the evaporator, it is vaporized into low-temperature and low-pressure steam, sucked by the compressor, compressed into high-pressure high-temperature steam, discharged into the condenser, and radiated to the cooling medium in the condenser, condensed into a high-pressure liquid, throttling through a throttle valve into a low-pressure low-temperature refrigerant, and again entering the evaporator to absorb heat and vaporize, to achieve the purpose of cycle refrigeration.

►Other Products

→Elevator Type Thermal Cycling Machine

→Salt Spray Corrosion Test Chamber For Surface Treatment Testing

•Come and Contact Us