Description
The B117 Climatic Salt Spray Testing Cabinet is based on the evaluation of the corrosion resistance and corrosion resistance of the materials and their protective layers and the comparison of the processing quality of similar safety protection layers. At the same time, it evaluates the corrosion resistance and corrosion resistance of some raw materials.
Name | B117 Climatic Salt Spray Testing Cabinet |
Model | S-250 |
Internal dimensions | 640*1000*500(mm) |
Overall dimensions | 810*1800*1180(mm) |
Temperature range | Ambient ~60℃ |
Humidity range | 95% ~ 98% RH |
Temperature fluctuations | +/- 0.5 ℃ |
Temperature deviation: | +/- 2.0 ℃ |
Test time | 1~999 hours, settable |
Spray deposition | 1~2ml / 80cm2 · h |
Spray type | Continuous / Periodic |
Temperature Controller | LED display, P.I.D+S.S.R. microcomputer integrated controller |
Temperature sensor | PT100Ω / MV A-class |
Salt fog collected | Fog collector and fog measure cylinder |
salt water filtration | Salt water filter near the suction tubes( Avoid the nozzle blockage) |
Salt water preheating | Saturated air barrel |
Spraying system | Atomizer tower and Spray nozzles (Fog is more fine and uniform distribution) |
Interior /Exterior material | Glass fiber reinforced plastics |
Standard configuration | Sample bracket / sample holder / spray nozzle / Fog collectors / measure cylinder |
safety device | over-temperature protection, water shortage protection, over current protection, earth leakage protection |
Sealing | Hydrostatic hood seal |
Standard | ISO 3768/3769/3770, DIN50021-75, ASTM B-117, JIS H8502, IEC 68-2-11,IEC68-2-52, MIL-STD-750, ISO 9227 |
Power Supply | 220V 50HZ |
![]() | ![]() | ![]() |
Temperature sensor | Spray Tower | Test Area |
Characteristics
1. Various complexes can be reproduced in one salt spray test chamber, cycling under three or four conditions: spray, dry, 100% humidity and static.
2. It is easy to compile the cycle program or directly run the test program that comes with the salt spray test chamber.
3. The salt spray test cabinet can quickly change the temperature of the chamber due to its unique in-box heater and large-capacity dry-cooling blower.
4. The all-plastic structure salt spray chamber is made of sturdy glass fiber reinforced plastic, which is anti-corrosion and does not cause pollution to the sample. Robust material facilitates accurate temperature control.
5. The spray control test machine has better atomization and dispersion effect than ordinary test machines, and can independently adjust the spray amount and spray distance.
7. Reliability The test equipment is equipped with the following safety sensors, in case of failure, these detectors will send a signal to the controller and stop the work of the corresponding parts.
![]() | ![]() |