Description
The IP Dust Ingress Chamber is driven by a fan to drive a certain concentration of sand dust through the surface of the test sample at a certain flow rate, so as to evaluate the ability of these test samples (equipment) to resist the penetration effect of dust particles under the action of dry sand or dust-filled atmosphere, the ability to defend against the abrasive or blocking effect of grit, and the ability to store and operate.
Main Technical Parameter
Name | ISO 20653 50℃ Dust Ingress Chamber | |
Model | DI-800 | |
Internal dimensions (mm)8 | 800*1000*1000 | |
Overall dimensions (mm) | 1040*1450*1960 | |
Temperature range | Ambient to +50℃ | |
Relative Humidity | <30%RH | |
Normal wire diameter | 50um | |
Normal width of a gap between wire | 75um | |
The Talcum powder amount | 2kg ~ 4kg/m3 | |
Fight time | 0 ~ 99H59M | |
Fan cycle time | 0 ~ 99H59M | |
Specimen power outlet | Dust-proof socket AC220V 16A | |
Controller | programmable color display touch screen controller | |
PC Link, R-232 interface | ||
Vacuum system | Equipped with a pressure gauge, air filter, pressure regulator, connecting tube | |
Circulating fan | Enclosed alloy low-noise motor, multi-vane centrifugal fan | |
Heating system | Independent Nichrome electronic heating system | |
Exterior material | Steel Plate with protective coating | |
Interior material | SUS304 stainless steel | |
Safety System | Electric leakage, short circuit, Over-temperature, motor overheating Over-current protection/ Power failure memory function for controller | |
Power supply | 380V 50HZ |
Details
![]() | ![]() |
Test Area | pressure gage |
![]() | ![]() |
Dust cycle | LAN and USB |
![]() | ![]() |
IP5X Dustproof Rating
Meaning: IP5X Dustproof Test ,Dust cannot be completely prevented from entering, but the amount of dust entering must not affect the normal operation of the equipment and do not affect safety.
Protection test: Test wires with a diameter of 1.0 mm cannot enter the housing and cannot maintain sufficient clearance with live parts.
Features
1. Visual glass door, easy to observe the condition of the test sample in the dust test chamber;
2. The bottom of the test chamber adopts high-quality fixed PU movable wheel;
3. There is a dust replacement device at the bottom of the sand test chamber;
4. Blowing dust and stopping blowing time are automatically alternated;
5. Vacuum pressure indication and adjustable;