Description
Thermal Shock Chamber is used to quickly find the hidden mechanical weaknesses in electronic components
when test specimens are exposed to rapid thermal shock condition, and you will not only reduce the premature
failures but also increase the reliability of your products when you choose our thermal shock test chamber.
Parameter
Name | Tmperature Simulation Used Thermal Shock Chamber TS-340 | ||||
Model | TS-340 | ||||
Inner dimensions of test room (mm) | 450*450*360 | ||||
Volume of test room (mm) | 72L | ||||
Load of test room | 30kg | ||||
Overall dimensions(mm) | 1710*1020*1845 | ||||
Pre-heat room
| Upper limit preheat temperature | +220℃ | |||
Heating time | Ambient temperature to ~ + 200℃, within in 30 minutes. | ||||
Pre-cool room | Lower limit pre-cool temperature | -75℃ | |||
Cooling time | Ambient temperature to ~ -70℃, within in 30 minutes | ||||
Test room | High temperature exposure range | Ambient temperature +20 to +200°C | |||
Low temperature exposure range | –65 to -5°C | ||||
Recovery time | Within 15 minutes | ||||
Temperature fluctuation | ≤±0.5℃ | ||||
Temperature deviation | ≤±3 ℃ | ||||
Controller | Programmable color LCD touch screen controller | ||||
Cooling system | Mechanical compression refrigeration system | ||||
Refrigerating unit | French TECUMSEH compressor | ||||
Refrigerant | R404A, R23 | ||||
Air circulation | Centrifugal wind fan | ||||
Exterior material | Steel Plate with protective coating | ||||
Interior material | SUS304 stainless steel | ||||
Power Supply | 380V 50HZ | ||||
Environmental conditional | 5℃~+40 ℃ ≤85% R |
Structure
![]() | ![]() |
programmable controller | Test Area |