Gas Source 0.4mpa Safety Test Equipment Ball Drop Impact Test Machine

Product Name: Ball Fall Impact Tester

Specification model: JD-6016

First, the test machine use / principle:

Uses: Falling ball impact testing machine is suitable for the fastness of plastic, ceramic, acrylic, glass and other materials and test coatings.

Principle: This machine adopts DC electromagnetic control method. The steel ball is placed on the electromagnetic suction cup and the steel ball is automatically sucked up. According to the falling key, the suction cup instantly releases the steel ball. The steel ball will be free fall test and impact the surface of the test piece. The drop height can be adjusted up and down, and the height of the altimeter is displayed. You can know the drop height of the parts and make your test accurate and effective.

Second, the test machine environmental requirements:

The test shall be carried out in an environment with a temperature of 20 ° C ± 5 ° C and a relative humidity of 40% - 80%. The test piece shall be placed flat on the fixture with a mass of 1040 g ± 10 g or a mass of 2260 g and a diameter of Ф 63.5 mm or The diameter is Ф82.5mm and rises to a certain height to impact the center position of the test piece. Observe the shape of the test piece and judge whether the test piece is qualified.

Third, according to the standard

IEC 61730:2-2004 No.10.10 "Component fracture test"

JJG 128-1999 "Safety Glass Ballistic Impact Tester"

GB 15763.2-2005 "Toughened glass reinforced elastic bag impact test" requirements, applicable to the impact of tempered glass

Performance test

The requirements of GB9962-1999 are applicable to the impact resistance test of laminated glass.

The requirements of GB17841-1999 are applicable to the impact resistance test of tempered glass and semi-tempered glass for curtain wall;

Fourth, the instrument description

1. Number of test products: one piece

2. Control mode: DC electromagnetic control

3, the action mode: steel ball free fall motion

4, drop height: 600-1500mm (adjustable)

5, positioning: infrared positioning

6, the use of gas source: 0.4MPa

7, quenched steel ball: mass 1040g ± 10g, diameter Ф 63.5mm one; mass 2260g ± 20g,

One diameter Ф 82.5mm

8, weight: about 200Kg

9, power: 220V, 250W, 50HZ

10, machine dimensions: 800x1100x2100mm (width x depth x height)

Five, the height gauge instructions:

1>Press the Set button to shift the button to make it flash. Press the Change button to change the setting value.

2>Automatically raise to the set height according to the positioning (Remark: Set the height to the actual required test height plus 385MM)

3>Press up and down to manually lift

4>Press the electromagnet in the pull-in state

5>Automatic positioning or manual lifting after suction

6> Press the release to start the impact