Burning Flame 38mm Safety Test Equipment Automotive Interior Material Burning Test Machine

Automotive interior material burning test machine

Product model:

JD-6008B

Applicable industry:

This combustion test device is suitable for identifying the horizontal combustion characteristics of interior materials of automobiles (cars, multi-purpose passenger cars, trucks and buses).

Product Description:

This burning test device can detect textiles, especially automotive interior fabrics and relative burning rate and flame retardancy. The instrument is equipped with a sealed stainless steel combustion chamber, observation window, sample holder and burner. The automatic gas control system includes an electromagnetic control gas valve, an automatic ignition timer and a controller.

Applicable standards:

Meet the standard requirements of GB8410-2006, TL1010, GM6090M, DIN7520, GM9070P, MVSS302

Test method:

The sample was horizontally held on a U-shaped bracket and ignited by a small flame for 15 s in a combustion chamber, and the flame was ignited at the free end of the sample. Record whether the flame is extinguished or when it is extinguished; and the distance the sample burns and the time it takes to burn the distance.

Instrument composition:

1. Combustion system: anti-corrosion combustion box, inner diameter 9.5mm gas lamp nozzle; Bunsen burner; ignition automatic control system, intake and exhaust system.

2, timing system: burning timer, afterflame timer.

3. Test fixture: It consists of two U-shaped corrosion-resistant metal plates. One of the brackets is provided with a heat-resistant metal wire diameter of 0.25 mm and a support line with a distance of 25 mm.

4. Glass observation window: The front part of the combustion box is provided with a heat-resistant glass observation window, which can easily observe the change of burning speed during combustion.

5. Stainless steel box: There are 10 venting holes with a diameter of 19mm at the bottom of the combustion box. The four walls are close to the top with a 13mm wide ventilation slot. The entire combustion chamber is supported by four legs 10 mm high. A small hole for inserting a thermometer is arranged at the top of the combustion box, and the hole is arranged at the center of the top and the back, and the center is 20 mm from the inner side of the rear panel.

Specifications:

(1) Burning box metal cover (studio size: length × width × height): 385 × 204 × 360mm

(2) Bottom vent spacing: 63.5mm lateral, 127mm longitudinal,

(3) Bottom ventilation holes: 10 pieces, diameter 19mm

(4) Ventilation trough: 360 × 13mm

(5) Bottom feet: 10mm

(6) Gas lamp nozzle inner diameter: 9.5mm

(7) Burning flame: 38mm

(8) The center of the nozzle mouth is below the center of the free end of the sample: 19mm

(9) The bottom of the sample is above the bottom of the combustion chamber: 178mm

(10) The front end of the sample holder is from the inner surface of the combustion box: 22mm

(11) Distance between the longitudinal side of the test bracket and the inner surface of the combustion chamber: 50mm

(12) The first support point of the test support is from the front end: 38mm

(13) The second branch of the test support is from the first pivot point: 100mm

(14) The third branch of the test support is from the second pivot point: 254mm

(15) Heat resistant wire diameter: 0.25mm

(16) Heat resistant wire spacing: 25mm

(17) Metal comb length is greater than: 110mm, there are 7~8 optical scallops per 25mm

(18) Collection tray: 336×85mm

(19) Timer setting: 15S (0~99.99/S/M/H can be set)

(20) Thermometer: MAX: 150 ° C

(21) Steel ruler: Accuracy: 0.1mm

(22) Gas: liquefied gas (self-provided)

(23) Power supply voltage: 220V/50Hz 3A

Discharged to the outside (preferably with environmental protection measures, separately configured)

Third, packing and transportation:

Packed according to GB/T13384-1999 standard; the car is transported to the demanding site, and the freight is borne by the supplier.

Fourth, after-sales service commitment (warranty description)

Customer satisfaction is our service tenet. Perfect after-sales service allows you to relieve all worries. We firmly believe that a good company sells not only a good product, but more importantly, good service.

1. One year warranty, lifetime service;

2. Provide after-sales service plan for users within 8 hours

V. Remarks:

(1) The whole machine is connected to the parts for one year (except for man-made damage and consumables).

(2) Lifelong maintenance (recovering travel expenses, parts costs).

(3) Product acceptance method is subject to specification configuration and parameter acceptance.

(4) The ownership of the unpaid purchase price machine is still owned by “Jiedong”.

(5) One copy of the instrument operation manual and product warranty card are included at random.