10mm Floor Thickness Safety Test Equipment Packaging Drop Test Machine

Product Name:Package Drop Tester

Model: JD-6001B

1), the product uses:

Single-arm drop tester This machine is designed to test the damage of the product package from falling, and to evaluate the impact strength during transportation and handling.

2), the design of applicable standards:

ISO2248 JISZ0202-87 GB/T4857.5-92

3), the product overview:

The single-wing drop tester can perform a free drop test on the face, corner and edge of the package. It is equipped with a digital height display and a height tracking using a decoder to accurately give the product drop height and the preset drop height. The error does not exceed 2% or 10mm. This machine adopts single-arm and double-column structure, with electric reset, electric control drop and electric lifting device: easy to use; unique hydraulic buffer device greatly improves the service life, stability and safety of one-arm setting, which is convenient Place the product, the angle between the angle of impact of the drop angle and the plane of the bottom plate is less than or equal to 5°.

4), the working principle:

The drop test machine is used to simulate the different edges, angles and faces of the product when it is dropped on the ground, so as to understand the damage of the product and evaluate the fall height and impact resistance of the product packaging components when falling. strength. Therefore, according to the actual situation of the product and the national standards, improve and improve the packaging design. This test machine is specially designed to test the damage of various products after being packaged or transported in various kinds of products. In order to prevent damage in advance, the machine can be used to predict the test. The best solution is to minimize the loss during transportation, as well as to assess the impact strength of electronic components that are dropped during handling; the reliability of the packaging container can be tested.

5), the main technical parameters:

1, drop height mm: 300-1500 adjustable

2. The maximum weight of the test piece is kg: 0-80Kg;

3. Thickness of the bottom plate: 10mm (solid iron plate)

4, the largest size of the test piece mm: 800 x 800 x 1000

5, impact panel size mm: 1700 x 1200

6, the arm size mm: 160 * 250 * 10

7, drop height error: ± 10mm

8, test bench dimensions mm: about 1700 x 1200 x 2315

9, height display; LED meter digital display

10, test method: face, angle, edge all-round drop

11. Transmission mode: electric drive

12. Impact panel parallel error: ≤ 1 degree

13. The angle between the falling surface and the horizontal angle during the falling process: ≤1 degree

14. Power: 380V1, power supply: AC380V 50HZ

15. Power: 1.85KWA

16. Net weight kg: about 300kg;

6),. Falling test bench structure editing

1. The main column is made of special high-quality steel, which is processed by external grinding and external plating, durable and never rusting;

2. Taiwan ST special custom chain;

3. Really complete the face, edge and corner drop test;

4. Electric reset, electronically controlled drop and electric lifting device, easy to use;

5. Ensure that the cargo bracket and the packaged test piece are freely separated, and the free fall of the packaged test piece is achieved, and the impact vibration is small, stable and reliable;

6. Configure the digital display height indicator and use the decoder for high tracking, so as to accurately give the product drop height;

7. The error from the preset drop height does not exceed 2% or 10mm.

7), notes and maintenance editor:

1. After each test, the falling arm should be dropped to avoid the long-reset drop arm to deform the spring, which affects the test effect. Before each drop, please reset to the motor to stop rotating before pressing the drop button;

2. After the new machine is installed in the factory, it is necessary to add appropriate low-concentration oil to the sliding round rod. It is strictly forbidden to add anti-rust oil or high-concentration oil and backlog with corrosive oil).

3. If there is dust in the oiling station for a long time, please lower the machine to the bottom, wipe the previous oil and re-oil it;

4. The drop machine is an impact mechanical device. When the new machine is used more than 500 times, the screws must be tightened.