Weight 100kg Safety Test Equipment , Directional (controlled) Drop Test Machine

Directional (controlled) drop tester JD-6001A

One. product description:

1. Mobile phone chargers, etc. (other electronic products) The 2m directional drop tester is a special device for performing drop fatigue tests on mobile phone chargers (other electronic products) at a higher altitude (0.3m to 2m).

2. The structure is reasonable and unique, and it has sufficient applicability to different types of mobile phone chargers.

3. The equipment is stable, low noise and maintenance free.

two. Testing purposes:

1. The durability of the outer casing.

2. The internal structure resists (heavy) fall performance.

three. Test process description:

Simulate the action of the user to drop the phone from a high place to a level such as the ground when using it.

Manually put the mobile phone (other electronic products) into the fixture, or suck on the suction cup → the clamp (suction cup) rises into position → the clamp (suction cup) and the mobile phone together become free to fall → when falling to a certain height is the clamp (suction cup) loose Open the mobile phone (other electronic products) → mobile phone (other electronic products) free fall and fall on the marble board.

four. Function realization:

1. Cylinder realizes clamping; motor realizes lifting; button control.

2. Adjust the drop height by adjusting the height parameter of the digital display.

3. Manual operation mode

Fives. The main technical parameters:

1. Number of stations: 1 / Taiwan

2. Operation mode: button operation, digital display setting related data.

3. Motion actuators: motor, SMC cylinder, vacuum chuck.

4. Drop height range: 0.3~2m (can be set)

5. Drop beat: 1 to 3 times / minute

6. Falling contact surface: marble, wood,

7. The maximum length of the fixture: 170mm, the maximum width of the fixture: 80mm

8. Voltage: 220V; Power: 950W; Air pressure: 0.4~0.6Mpa

9. Dimensions: 550mm * 650mm * 2650mm;

10.Weight: 100kg