Needle Stroke 400mm Safety Test Equipment Power Battery Needle Test Machine

Product Name: Power Battery Needle Tester.

Model: JD-6007D

First, the product name: power battery needle test machine

Second, the product model: JD-6007D

Third, the product overview:

This machine is suitable for simulating various types of batteries to be subjected to needle sticking during transportation and storage. The test shall be carried out at an ambient temperature of 20 °C ± 5 °C. The battery with the thermocouple (the contact of the thermocouple is fixed on the large surface of the battery) shall be placed in a fume hood with an rust-free steel of 2-8 mm in diameter. The needle pierces the center of the largest surface of the battery at a speed of 10 mm/s to 40 mm/s, and maintains the test at any time and observes the test results. The battery does not explode and does not ignite.

Fourth, the design basis:

GB 31241-2014, GB/T 8897.4-2008, YD/T 2344.1-2011, GB/T 21966-2008, MT/T 1051-2007, YD 1268-2003, GB/T 19521.11-2005, YDB 032-2009, UL 1642, UL 2054, IEC 62281, IEC 60086

V. Equipment technical parameters:

1, needle force value: 50 ~ 100KN (can be customized)

2. Force measurement accuracy: ±1%

3, steel needle: ф6 ~ ф10mm high temperature steel needle, length 100mm

4, acupuncture stroke: 400mm (customized according to battery size)

5, test speed: 10 ~ 40mm / s (can be set)

7, unit conversion: kgf, lbf, N, kN, KPa, MPa

8, control method: computer control

9, drive mode: hydraulic drive

10, test product size: 500x500x500mm (can be customized)

11, box material: inner box stainless steel, outer box cold-rolled steel plate spray treatment

12. Features: The rear side of the box is designed with an air outlet, and the box is equipped with lighting

13, weight: about 750KG

14, power: 3 ∮, 380V, 50HZ

Six, equipment reference picture: