Laboratory 35 °c ± 1 °c Salt Spray Test Chamber Jd-90 Salt Spray Test Machine
JD-90 Salt Spray Tester
Application: Salt spray testing machine, is for a variety of material surface treatment, including coatings, electroplating, organic and inorganic film, anode treatment, anti-rust oil and other anti-corrosion treatment after testing its corrosion resistance, thus establishing the quality of product.
I. JD-90 Salt Spray Tester
II. Product Specifications
Inner box size:900×600×500mm ( W * D * H)
Size of outer box:1410×880×1280mm ( W * D * H)
Source: Single Phase 220V 2KW 50H
III. All materials
1. | The laboratory adopts imported PVC polyethylene plates with a thickness of 5mm and a durable temperature of 85 °C. |
2. | The laboratory seal cover adopts an imported European acrylic plate with a thickness of 5mm. |
3. | The test drug supplement bottle adopts a hidden attached water level meter, which is easy to clean and not easy to break. |
4. | SUS # 304 stainless steel high pressure bucket is the best heat insulation effect for pressure air bucket |
5. | The laboratory basket frame adopts the plane division frame, which can adjust the angle arbitrarily. The four sides of the fog and the fog are exactly the same, and the number of test plates is placed. |
IV. According to CNS.JIS. ASTM specifications, it can be set to constant temperature control
1. | Saltwater spray test | NSS(neutral), ACSS(acidic) AASS(acetate fog test) |
2. | Test room: Pressure air drums: | 35℃±1℃ 47℃±1℃ |
3. | Corrosion test | CASS(copper acetate) |
4. | Test room Pressure air drums | 50℃±1℃ 63℃±1℃ |
V. Air supply system: 1 kg/ccm air pressure adjusted in two stages
For the first time, it is adjusted to 2kg/ccm imported air filter with drainage function;
The second adjustment is 1 kg/cm pressure.
VI. Spray mode
1. | Using the principle of Bonute to absorb salt water and atomize it, the degree of atomization is uniform, and there is no phenomenon of blocking crystallization, which can ensure the standard of continuous testing. |
2. | Nozzles: Made of special glass nozzles, the size of the spray can be adjusted. |
3. | Spray volume adjustment type 1-2 mI(mI/80 cm/h)(16-hour average) |
4. | Spray method: continuous type |
5. | Using direct heating, the fast heating speed reduces the standby time. When the temperature reaches ON.OFF switching, the temperature is accurate and the power consumption is low. (Heating tube is made of high corrosion resistant heating system: titanium tube). |
VII.navar
1. | Laboratory temperature controller 0-99 .9 °C, LCD dual digital display with P.I.D automatic calculation, control error ± 0.3 °C(YANGMING) Taiwan | 1 |
2. | Pressure air bucket temperature control 0-99 .9 °C, LCD dual digital display with P.I.D automatic calculation, control error ± 0.3 °C(YANGMING) Taiwan | 1 |
3. | Laboratory heating tank liquid expansion safe temperature control 1-120 °C(Italy) | 1 |
4. | Pressure air bucket liquid expansion safety temperature control 1-120 °C(Italy) | 1 |
5. | Digital display time control 0.1 S-99999hr(Taiwan Anliang) | 1 |
6. | Accumulator 0-999999 HR(Italy) | 1 |
7. | Relay(OMRON, Japan) | 5 |
8. | Spray solenoid valve(imported KSD) | 1 |
9. | Fog removal solenoid valve(imported KSD) | 1 |
10. | Automatic water solenoid valve in laboratory | 1 |
11. | Automatic water solenoid valve for pressure drum | 1 |
12. | Plate light type button switch, can hold 20,000 times in a row | 1 |
13. | Water system: use of automatic water replenishment system | 1 |
14. | Salt mist sealed sink: automatic water addition method | 1 |
VIII,Safety protection device
(A) When the water level is low, automatically cut off the power supply device.
(B) When the temperature is too high, automatically cut off the heater power supply device.
(C) A safety warning light device.
(D) Automatic warning lights at the end.
IX. Standard Configuration
1. | Spray Tower | 1 set |
2. | A shelf | 6 sticks |
3. | Baton | 8 sticks |
4. | Standard Tasks | 2 sticks |
5. | Temperature indicator needle | 2 sticks |
6. | Receptor | 2 sticks |
7. | Glass | 1 branch |
8. | Humidity | 1 (regular replacement) |
9. | Fog | Group 1 |
X. Random attachments
1. | Test drug sodium chloride(Nacl) 500 grams | 2 bottles. |
2. | Manual of Practice and Warranty Card | 1 item |
3. | 5 L plastic measuring cup | 1 branch |