100a Electromagnetic Vibration Test Bench 0~5mm Arbitrarily Adjust Amplitude

Product Name: Electromagnetic Vibration Test Bench

Model: JD-100A

First, the product name:

electromagnetic vibration test bench

Second, the product model:

JD-100A

Third, the equipment description:

1, use / principle:

The test machine is designed according to the relevant test standards of the battery. The simulated battery is tested under a certain vibration frequency to fix the battery or the battery pack to the vibration table. In the specified battery frequency mode, the battery samples are perpendicular to each other in three directions. Vibration, the battery to be tested does not leak, does not deflate, does not rupture, does not ignite, does not explode as a good product. The machine is easy to install, simple to operate, low in noise, easy to maintain, no resonance structure, well-designed, and the airbag shockproof pad effectively isolates vibration.

2, according to the standard

UL1642, UL 2054 "Lithium Battery Standard"

UN38.3 "Lithium Battery and Battery Pack Test Standards Regulations"

IEC62133GB/T 18287-2013 "Lithium-ion battery general specification for heavy-duty impact test of cellular phones"

GB 31241-2014 "Lithium-ion batteries and battery packs for portable electronic products - Safety requirements"

GB-31241-2014 "Safety Requirements for Lithium Ion Batteries and Battery Packs for Portable Electronic Products"

QB/T2502 "General Specifications for Lithium Ion Batteries"

3. Technical parameters:

a, function: sine wave (half wave / full wave), frequency modulation, frequency sweep, programmable, frequency multiplication, logarithm, amplitude, maximum acceleration, time control, 485 communication interface, simple acceleration, simple fixed amplitude;

b. Vibration table size: L500×W500×H10mm and L500×W500×H200mm

c, vibration direction: vertical (Y) axis, horizontal (X) axis

d, the maximum test load: 0 ~ 100Kg / maximum excitation force within 2000Kgf

e, FM function: arbitrarily adjust 1 ~ 600Hz, in the frequency range, any frequency can not exceed one of the 2 items (maximum acceleration <20G and maximum amplitude <5mm)

f, sweep function: any adjustment 1 ~ 600Hz, (upper band / lower band / time range) can be set arbitrarily set the standard standard back and forth frequency sweep

g, vibration machine power: 2.2kw

h, amplitude: arbitrarily adjust the amplitude 0 ~ 5mm

i. Maximum acceleration: arbitrarily adjust the maximum acceleration from 0 to 20G (200m/s2)

j, vibration waveform: sine wave (half wave / full wave) / maximum sine wave excitation force 2000kgf

k, time control: can be set at any time (unit: second)

l, precision: frequency can be displayed to 0.01Hz, precision 0.1Hz

m, cooling method: natural air cooling

n, temperature: -10 ° C ~ +60 ° C

o, humidity: 10% to 90%

p, noise: ≤ 60 decibels

q, power supply: 220V, 50/60Hz

4. Equipment picture: