Burning Wire Rubber Tester Combustion Test Area Volume > 0.5 Cubic

Glow Wire Tester 3052A

First, the product introduction:

The glow wire tester is suitable for conducting fire hazard tests and combustion performance tests on electrical and electronic products, household appliances and their materials, simulating heat sources or ignition sources such as hot components or overload resistors under short-term fault or overload conditions. The resulting thermal stress is used to assess the fire hazard of the product.

The glow wire tester control system has a high degree of automation, and the temperature control part adopts imported parts. The measurement accuracy is high, the time and temperature are digitally displayed, the observation and record are convenient, and the use is stable and reliable. The test chamber casing and important parts are made of stainless steel, which is resistant to smoke and gas.

This equipment is designed and manufactured according to the relevant provisions of GB4706.1 and GB/T5169.10-2006.

Second, the main technical indicators:

1 The temperature of the glow wire is adjustable within the range of 500-1000 °C, and the accuracy of the temperature measuring instrument is ±0.5. The temperature is measured by a 1mm nickel-chromium armor (K type) thermocouple.

2 The glow wire applies a force of 0.8 N to 1.2 N to the sample and limits the indentation depth to at least 7 mm.

3 The application time of the glow wire to the sample (Ta) is adjustable from 0 to 99 minutes and 99 seconds, generally set to 30 seconds according to the standard requirements, and has a measurement of the light-off duration (Ti) and the flame-off time (Te). Timer. Time error ± 1 s.

4 The instrument is easy to operate and the temperature measurement system is stable and reliable.

5 outside instrument size: height 1230mm * width 1100mm * depth 680mm

6 glow wire tester 3052A