Fully Automatic Insertion Force Universal Testing Machine Load Weight Accuracy 0.02%

product description:

● Solve the fixture problems of various connector tests, and the male and female connectors can be automatically aligned during the test, there will be no unilateral problems;

●With the dynamic impedance test system, the dynamic impedance can be tested at the same time as the test insertion force and draw the "load-

stroke-impedance curve";

● This machine is suitable for the insertion force and pull-out force test of various connectors. It provides a variety of connector-specific clamps

and a special automatic centering device, which will give a completely accurate insertion force test.

●Chinese version of WINDOWS system; software (Chinese simplified, Chinese traditional);

● All data can be stored (test conditions, plug-in stroke graph, life curve graph, inspection report, etc.).

Test items:
● Connector single hole insertion test ● Connector whole row insertion test

● Connector plug life test ● Connector single Pin and plastic retention test

● Connector retraction test ● Connector positive force test (Normal Force)

● Various compression, tensile failure strength test ● Terminal load resistance test

● Terminal or connector impedance (contact impedance test system)

Specifications:

Machine features:

1. The test conditions are set by the computer screen and can be stored. You can check the settings from the drop-down menu or enter the data directly. (including test category, measurement motion direction, load measurement range, stroke measurement range, stroke origin position, stroke origin detection, measurement speed, total number of measurements, pause time, each waiting position, air pressure number)

2, can store and print graphics (load - stroke curve, load decay life curve, inspection report).

3, the load weight overload protection function, can ensure that the load element will not be damaged.

4. Simultaneous display of load-stroke curve and life curve.

5. The automatic load zero is detected, and the origin can be set to detect the load value.

6. The load unit shows that N, lb, gf, and kgf can be switched freely.

7. The machine adopts the steel structure design and the servo motor. It can ensure the accuracy under long-term use, and is suitable for

general extension, compression test, and plug-in force life test.

8. The over specification value stops. (In the life test, the test data exceeds the setting above the lower limit specification value and the

machine automatically stops).

9. Measurement items: maximum load value, peak value, valley value, load value of stroke, stroke value of load, resistance value of insertion

point, load value of resistance or stroke.

10. automatic integration of micro-ohmic test module, you can measure the milliohm resistance value without the need to purchase a micro-

ohmic tester.(The first domestic software and on-resistance integrated manufacturer).

11. Curve comparison and comparison function;

12. The contents of the inspection report can be modified at any time (both Chinese and English);

13. The inspection report can be transferred to EXCEL for editing;

14. the graph report, the text report can be specified by the customer and the LOGO;

15. Independent research and development of software and hardware, with intellectual property rights.

Test report output:

Load-stroke curve, life curve, test report, all are A4 standard paper specifications, and printed directly by computer printer.

※Pull-in load-stroke curve:

▲ can directly display and store the displacement and force value changes for each test.
(X axis represents travel and Y axis represents power)

▲Each measurement pattern can be tracked by the 10A cursor, and each measurement point is read.
Corresponding load and stroke value, minimum resolution 0.01mm

▲The curve is automatically stored by the computer, can be zoomed in and out at any time, and a piece of paper can be arbitrarily pointed
Place N graphs.

▲Roller graph display, you can browse the graph at will.

▲ Simultaneous display [load-stroke graph] and [life curve]

※Life curve:

▲ The header of the report can be modified at any time.

▲ The maximum, minimum and average values of each curve can be displayed on the report.

▲The specification line of the upper and lower limits of the test can be displayed on the report.

▲ It can be set to display multiple sets of life charts at the same time.

※ test report:

▲ test report is automatically generated (A4 specification), and can be converted to output (such as Excel) or
Direct output through the network.

▲ The header of the report can be modified at any time.

▲ automatic calculation: maximum, minimum, average, difference, standard deviation,
Engineering Capability Index.

▲You can input the upper and lower limits of the test. If the specification is exceeded, the OK or NG will be automatically determined.

Instrument advantages:

1. The software develops itself and has independent intellectual property rights.

2. The single-chip adopts the latest imported chip, high integrated control system, small size and full function.

3. When the speed is 300mm/min, the position is accurate and there is no drift. At the same time, in the case of 600mm/min,

In the range of 0.002mm.

4. the MCU comes with contact resistance function, no external impedance device is needed, and the force and stroke of the conduction point

are detected at the same time of testing force value and stroke (Remark: no need to purchase separately, the first domestic software and on-

resistance integrated manufacturer , the measurement data is more stable and more accurate).

5. All lines adopt plug-in parts and modular structure, and the after-sales service is convenient.

6. easy to operate, easy to learn, and with compression, retention testing, broken fracture function.

Precautions:

1. Due to the axial force of the load sensor (including the push and pull directions), it will be damaged when the maximum load is 120%.

Please be careful when handling. In addition, the lateral load and the step load should also be avoided.

2. The machine has complete protection for the load cell, but the prerequisite is that the load cell connection must be determined. In addition,

if you use the unit under normal procedures, the load sensor can be fully protected even if high-speed motion causes hard contact.

3. the use of the machine and computer control part is recommended to use a special plane, especially pay attention to the protection of

computer viruses.

4. In the process of machine test, the use of other peripheral products, such as printers, network transmission, etc., should be avoided to

prevent data loss.

Standard configuration (accessory):

Various fixture reference pictures: