Resolution 1kpa Anti-pressure Automatic Break Test Machine Hd Lcd Display
Automatic burst strength testing machine JD-3200
1. After the cardboard is crushed, it will automatically stop and return to the initial position;
2. Fully automatic one-button operation;
3. Can store 50 sets of data at the same time;
4. With micro printing, the test results can be printed;
5. Equipped with emergency stop button to improve operation safety;
6. With pressure and pressure gauge, monitor the pressure at any time;
7. HD LCD display.
8. Change the traditional glycerin + water practice, use silicone oil, the machine is not easy to rust, and extend the life of the machine.
.
Product introduction:
In accordance with the relevant standards, the pneumatic clamping sample, liquid crystal display, is suitable for the determination of the bursting resistance of cardboard, corrugated board and other sheet materials.
Adopt standard:
ISO 2759: Determination of the burst strength of cardboard;
GB/T 1539: Determination of the bursting strength of cardboard;
QB/T 1057: Paper and cardboard burst tester.
The main technical parameters:
Induction method | Pressure transducer | |
Savings result | With print function, you can print 10 groups of data and automatically calculate the average | |
Display method | High-definition LCD display, digital A/D value of 100 times / S, high test accuracy | |
Power unit | Kgf/cm2, Lb/in2, Kpa (with unit switching function) | |
Measuring range | 250~6000kPa | |
Resolution | 1kPa | |
Measurement accuracy | Indication error | Better than ±1% FS |
Indication variability | Better than ±1% | |
Oil pressure speed | High pressure type 170±10ml/min | |
Film resistance |
Film resistance 10mm, 170kPa~220kPa Bulge 18mm, 250kPa~350kPa |
|
Clampringmaterial | stainless steel | |
Clamping force | >690Kpa (adjustable) | |
Upper clamp ring inner diameter | φ(31.5±0.05)mm | |
Lower clamp ring inner diameter | φ(31.5±0.05)mm | |
Upper chuck diameter: | 95mm | |
Lowerchuck diameter: | 135mm | |
Hydraulic oil | Silicone oil | |
volume | 430*530*520mm | |
Weight | About 70KG | |
power supply | 1∮,AC220V | |
Standard configuration | 5 rubber film, 1 wrench, 10 correction tablets, 1 bottle of silicone oil |