IP Camera Thermal Imaging Infrared Thermal Imaging Camera Tmeperature Measurement

KDM-9713RT dual vision thermal camera can be installed in a field which has a fire hazard requiring real-time temperature monitoring(such as warehouse, aging workshop,electric power and engine room ) , it can store and analyze the collected data of temperature and visible light which is transferred to switch and PC client through IP network. When the abnormal temperature is detected, a real-time alarm message will send to user’s cellphone through the cloud, and users can also check the site condition by mobile app.

Infrared thermal technology can be widely used in low light environment, it can penetrate heavy smoke and fog to obtain precise temperature ,analyze small temperature difference, output the real-time temperature distribution image and play an important role in the early prevention stage of a fire hazard.

• Thermal camera	Resolution/pixel size	160*120/12μm
  	NETD	≤50mK(@25℃,F#=1.0)
  	Frame rate	9FPS
  Visual camera	Sensor	1/2.9 inch CMOS
  	Pixel	2MP
  	Focus	3.6mm
  	Frame rate	30FPS
  	Fill light	3 meter infrared fill light
  Function	Interface	Audio I/O, alarm I/O, BNC video output, 10M/100M RJ45
  	Network protocol	RTSP,ONVIF,GB/T28181,RTP,TCP,UDP,UPNP,PPPOE
  	Temperature measurement	Full-screen and partial temperature measure Low gain mode:-10℃〜+150℃,±3℃/±3% High gain mode:-10℃〜+450℃,±7℃/±7%
  	Abnormal temperature alarm	High&low temperature limit value, partial temperature difference value alarm supported
  	Max image size	1920*1080(visual),640*480(infrared)
  	Video compress standard	H.264/H.265
  Full product parameter	Working temperature and humidity	Temp:-20℃〜+55℃,humidity≤90%
  	Ingress protection	IP67
  	Power	DC12V

• Features

• Full-screen temperature measurement, max&min temperature tracking
• ODS overlay display for max/min/avg temperature value
• Thermal and visual snapshot,recording start&stop supported
• With a unique image enhancement technology, a clearer image can be achieved
• 1-CH RJ45 standard 100M Ethernet data access for 2-CH video(thermal and visual) transmission, free switching for visual , thermal and picture-in-picture mode
• Maximum 6 temperature measure zones settable, max/min/avg temp display in each zone
• RTSP,ONVIF and GB/T28181 protocol supported
• SDK provided for secondary development
•