NTC Diode Glass Bead Thermistor For Home Appliance Automotive Electronics
Brief Introduction:
MF58 series glass bead temperature sensor, As one NTC thermistor sensor, glass coating NTC thermistor is made of glass bead, thinner dumet wire. Its feature is high-temperature resistance. Glass coating NTC thermistor is widely applied for automotive electronics, house appliances, industrial devices, etc.
Features:
Glass encapsulation
High temperature resistant
Operating temperature range: -40℃~250℃
Application:
Home appliance
Automotive electronic
Industrial device etc
Part Number Code:
For example: B8103F3435BF: MF58 series NTC thermistor, R25℃=10kΩ±1%, B25/85=3435k±1%
Structure and Dimensions:
NO. | Name | Material Specification | QTY. | Remarks |
1 | Chip | NTC Chip | 1 | / |
2 | Encapsulation | Glass | 1 | / |
3 | Wire | Cu/Sn Cable | 2 | / |
Standard packing (inner packing): 500pcs/polybag
Electrical Specification:
Product Specification | Rec.at 25℃(KΩ) | Beta value | (In air) Pmax(mW) | δ (mW/℃) | Thermal time constant τ(sec.) | Operating Temperature Range TL-TH(℃) | Total length L(mm) |
B8202□3470A | 2 | B25/85=3470 | Approx.20 | Approx.1.0 | Max.15 | -40~250 | 60 |
B8202□3830A | 2 | B25/85=3977 | |||||
B8103□3470A | 5 | B25/50=3470 | |||||
B8502□3950A | 5 | B25/85=3950 | |||||
B8103□3435B | 10 | B25/85=3435 | |||||
B8103□3470A | 10 | B25/50=3470 | |||||
B8103□3580A | 10 | B25/50=3580 | |||||
B8103□3630B | 10 | B25/50=3950 | |||||
B8103□3950A | 10 | B25/50=3950 | |||||
B8103□3977B | 10 | B25/50=3950 | |||||
B8503□3950A | 50 | B25/50=3950 | |||||
B8104□3950A | 100 | B25/50=3950 | |||||
B8104□3990A | 100 | B25/50=3990 | |||||
B8104□4132B | 100 | B25/85=4132 | |||||
B8104□4200A | 100 | B25/50=4200 | |||||
B8200R102□4537G | R200℃=1 | B100/200=4537 |
Operation Notice:
1. The current flowing through the NTC is controlled within the Pmax range to avoid the measurement error caused by the self-heating of the component.
2. Avoid excessive heat shock, The hot air blow should be at least 30mm to the probe in case a heat-shrink protection tube needs to be attached.
You may also like: