Human Body Cavity Temperature Sensor For Medical Monitoring Equipment

Brief Instruction:

Medical human body cavity temperature sensor ( esophgeal/ rectal temperature probe) is used for human body cavity temperature measurement, Used for the patient monitors. The sensor be composed of epoxy bead and 2 pin aviation plug. Meanwhile, we also accept the customized plug or connector. The rated resistance value 2.252kΩ or 10kΩ. The measured temperature tolerance within ±0.1℃, compatible for replacement Mindray series sensor. CE certification

Features:

Epoxy encapsulation

Reusability

Temperature tolerance

(25~45)℃±0.1℃

Operating temperature range: 0℃~50℃

Application:

Suitable for medical monitoring equipment

Structure and Dimensions:(Unit:mm)

Standard packing (inner packing): 1 pcs/polybag

Operation Notice

1. Application:Temperature measure ；

2. The current flowing through the NTC is controlled within the Pmax range to avoid the measurement error caused by the self-heating of the component.

3. Avoid excessive heat shock,The hot air blow should beat least 30mm to the probe in case heat shrink protection tube need to be attached.

4. Storage Temperature -10℃～40℃,≤75%RH；Avoid in a corrosive gas and sunlit environment; After opening the package, it needs to be sealed again.

5. According to the structure of Glass coating NTC thermistor, when end user install, to avoid the epoxy head subjected too much tensile force and bending force from the lead wire,The lead wire shall be controlled at a bending point or a force point on a lead wire 6mm or less below the sealing head.So as not to hurt the chip, resulting in resistance drifting and even open circuit, esepcially when the component is heated.

We have a complete after-sales team, if not satisfied, please contact our customer service, our service to your satisfaction. It is our duty and responsibility to safeguard your rights and interests and let you shopping without worry!