Automotive Battery Electrical Testing Equipment Thermal Shock Chamber
thermal shock test chamber | |||||
| GS-547 | GS-548 | GS-549 | GS-550 | GS-551 |
Workroom Dimensions(cm) | 50*50*60 | 60*60*70 | 60*70*70 | 80*80*80 | 100*100*100 |
Temperature Range | A:-20℃-150℃ B:-40℃-150℃ C:-60℃-150℃ D:-80℃-150℃ | ||||
Fluctuation / Evenness | ±0.5℃/±2℃ | ||||
Conversion time | 15s | ||||
Recovery time | 5 min | ||||
Time needed for heating | RT℃~200℃≤30min | ||||
Time needed for cooling | RT℃~-45℃≤30min | ||||
low temp.zone temp range | -45℃~ -10℃ | ||||
High temperature control | RT+10℃~-200℃ | ||||
The machine noise | ≤72dB(A) | ||||
Load on the largest | ≤20 kg | ||||
Equipment installed power | ~3.25KW | ~3.55KW | ~3.95KW | ~5.5KW | ~38.5KW |
Material | The studio:# SUS304 stainless steel The outer wall: Cold plate coating/ #SUS304 | The outer wall: Cold plate coating/#SUS304 | |||
Wind Cycling Way | Centrifugal fan-broadband type forced air ciruculation | ||||
Refrigeration Way | Single stage compression refrigeration | ||||
Refrigerater | French Tecumseh | ||||
Refrigerats | R404A USA Dupont environment protection refrigerant | ||||
Condesing Way | Air-cooled or water-cooled | ||||
Heater | Nickel Chorme Heating Wire Heater | ||||
Humidifier | Semi-closed steam and wet | ||||
Water Supplying way | Automatic cycling water supply | ||||
Control Instrument | OYO-8256p or HLS980 | ||||
Safety device | Non-fuse-switch(compressor overload, refrigerant hihg low voltage, over-humidiy and temperature protection, Protection switch, fuse stoppage warning system) |