Button Click Electronic Product Tester Simulation Operation Multi Function
Model: RS-6200A
Application and brief introduction:
This tester is to simulate to operate the electronic product, it is to click the power button, the buttons on edge of the product, and insert & extract the USB at the USB port, the earphone plug to the earphone port,to check the durability of the buttons on edge and the connection ports. This tester is controlled by touch panel, the parameters setting, editing can be done by the touch panel.
The main specialties:
1. Tester is controlled by touch panel, the set-able testing parameters: the time of air cylinders out and withdrawing, sequencing testing (4 sets
air cylinders working independently in different time) and simultaneous testing, testing cycles; the testing method can be edited,recoded, and
called for use.
2. All the action components are from Japan: air cylinders, electromagnetic valve, pressure adjusting valve from SMC, PLC from Mitsubishi.
3. The position of air cylinders are adjustable according to the needed testing position, it is designed to be magnet attaching, easy to be moved;
the tester can test 4 tablets as the size of iPad at the same time.
Main technical specification:
Air cylinders | 4sets |
The stroke of air cylinders | 0~30mm or 0~45mm |
The range of testing cycle | 0~999999(Set-able) |
The speed of hitting/ inser t& extract | 10~120cycles/min(Adjustable) |
The testing table size | W1100*D450*H300mm |
Cylinders installation range | 800*600mm |
The force of air cylinders | 100~1500gf(or as designating) |
Air source | ≥0.6MPa |
Dimension | W1200×D800×H915mm |
Weight | 155kg |
Power supply | 1∮,AC110V,10A |
Drawing and size:
The power button fixture and testing drawing:
Can satisfy to test 4 tablets as iPad size:
The sample holding fixture: