Application:
Hook and Loop Fatigue Tester is applicable for repeatedly open and close motion for touch and close fasteners.
Standards: DIN 3415, BS EN ISO 22776, BS EN ISO 22777 SATRA TM123, GB/T3903.20, GB/T3903.21 |
Install the hook and annular respectively on two rollers of this device. Stick them together under certain load and to generate repeated opening and closing motion through a certain times of forward and reversal rotating. After that, remove the sample and determine its peeling and shear strength testing on tensile tester.
Model | GT-K19 |
Control method | LCD Touch screen controlled |
Sample dimension | Length 540±10mm, width: 20~50mm |
Upper idling drum | Diameter 162.5±0.5mm |
Under driven drum | Diameter 160±0.5mm |
Drum width | 70mm |
Clamp slot | Width 4mm, length 55±2mm |
Test speed | 60±5r/min |
Reversal intervals | 30±5 s |
Test load | 1±0.1N/mm |
Test times | 5000 cycles |
Power supply | 1∮AC 220V 50/60HZ |
Dimensions( L x W x H ) | 55 cm ×45 cm ×65 cm |
Weight | 55kg |
Standards | DIN 3415, BS EN ISO 22776, BS EN ISO 22777 SATRA TM123, GB/T3903.20, GB/T3903.21,GB/T 23315 |
Standard Accessories:
10N Weights | 1 pc | To exert load on rotating wheel |
20N Weights | 1 pc | To exert load on rotating wheel |
Power Line | 1 pc | Current transport |
Optional Accessories:
Press Roller | Optional | Diameter 100 mm |
Universal Tensile Tester | Optional | Peeling and shear strength test |